Gender
Male
About
Location
Murray, NE
Please tell us a bit about your UAV interest
Building UAV's for Search and Rescue
Hometown:
Murray, NE
Activity Feed
"Put mine together last week and got the Navio2/RPI3 in the air on an RCTimer 700 frame over the weekend for a couple test flights. It needs some tuning but here is a boring <G> hover video of the maiden voyage. The people at Emlid are awesome and…"
"On my FY G3 gimbal the SJCam 4000 couldn't be used with GoPro bracket because it was slightly thicker. It didn't cause problem with gimbal but the FYG has larger servos. The 2 main reasons I went back to GoPro 3+
1) Pics and video simultaneously …"
1) Pics and video simultaneously …"
"3DR ordering process is jacked. I ordered 2 items almost a month ago and had no indication of a back order for the MinimOSD (which I have not received). I called when getting a confirmation email for only 1 item shipping and the rep said no, that…"
"No I haven't tried others, just left at the 250 default. It's for aerial platform and I'm looking for a tame stable flying platform.
-Jon"
-Jon"
"What value did you use in the setting?"
"Thank you for your response! My current default is 250, any ideas if I should try at 50cm/sec as I've seen in another post?
-Jon"
-Jon"
"What did you end up setting the PILOT_VELZ_MAX value at? I have the same problem in Alt Hold and Drift mode. It shoots up like a rocket. Loiter and Stabilize are fine.
Thanks
Jon "
Thanks
Jon "
"Thank you to all for your tireless efforts!"
"I also have Pixhawk powering up the air radio. I'm getting ready for 1st test flight and a newbie but the RFD900's are connecting and I've saved a flight plan with the modem connected to telemetry port. I can't speak to whether it will be as…"
"Updated progress - The RFD900 radios work!!!
Seppo from RFDesigns rocks! He responded quickly to my email and explained how to reboot the radio (showing solid green) and update firmware. It took me rebooting system and unplugging/plugging in the…"
Seppo from RFDesigns rocks! He responded quickly to my email and explained how to reboot the radio (showing solid green) and update firmware. It took me rebooting system and unplugging/plugging in the…"
"I thought I had added this to the 3.2 beta group, it doesn't appear so (newbie here). Will do better next time!"
Last weekend I updated firmware to 3.2 RC14 from current stable release. Prior to the update I had performed several ESC calibrations (during build) and had successful flights. Updating to latest beta all seemed well after several flights, however,…
"I thought about that too. I have a plane with a couple radios but they are disconnected and not powered on. It seems very odd that I plug in GS radio and get flashing green and can access, unplug and plug in the 2nd and get solid green and no…"
"Hello Zach. I sent you a request but didn't include why. I ran across this post and wanted to know if you would be so kind to try and assist me with my JDrones RFD900 radios. Can't connect via COM7 57600 and this is what has happened so far:
1)…"
1)…"
"Updated progress. Found that there was an extra cable in the box for"
