Hello Everyone,I am having trouble with my copter a few days ago, when I tried to test the failsafe feature of the copter.I am using 4S 5200mah batter for my copter and my failsafe setting is battery voltage at 14V and RTL should be triggered when…
Hello everyone ! After I see RTL mode is working quite well from my last flight, I decided to try automode with somewaypoints.I flew my plane twice with two batteries . My first flight, started by FBWA to take off, change to RTL to check it one more…
Today I flew it and it indeed works well for RTL and Loiter mode ( now I have throttle )
1. However, the throttle that RTL mode uses eats up 10A and I definitely I would like to lower the throttle value. I would…"
"Stephen Thank you for the reply and explanation . But I have some more questions
I was flying around 50m and I believe that I didn't change the default altitude so it should be set as 100m
For the home altitude , the value is 100m for mission…"
Hello everyone ! I am new to pixhawk and ardupilot and currently have some problems with my first flight. I tested my first built Skywalker 1880mm T tail shape frame and for some reasons, I was not able to get any throttle for the RTL mode Auto…