Gender
Male
About
About Me:
Tool Designer
Please tell us a bit about your UAV interest
Building Tricopter with APM 2,5 Board
Hometown:
Luleå
Activity Feed
"Hi.
Thanks to all developers and test pilots that helps to improve Arduplane.
Im running a APM 2.6 in my plane and using a servo gimbal.
Is it possible to compile Arduplane 3.3.0 by myself and include gimbal support and shut down other features like…"
Thanks to all developers and test pilots that helps to improve Arduplane.
Im running a APM 2.6 in my plane and using a servo gimbal.
Is it possible to compile Arduplane 3.3.0 by myself and include gimbal support and shut down other features like…"
"Tryed RC 4 again today and had efk_check to 0,9 and baroglitch_dist 500.
Alot of errors in the log and Poshold stopped working in middle of flight and started to land.
No problem in other flightmodes.
Hardware: Tricopter with APM 2.5
Should i try…"
Alot of errors in the log and Poshold stopped working in middle of flight and started to land.
No problem in other flightmodes.
Hardware: Tricopter with APM 2.5
Should i try…"
"Check this thread, http://diydrones.com/forum/topics/uploading-problem-w-programming-a....
Make sure that you have the latest MHV AVR Tools and copy the
C:\Program Files (x86)\MHV AVR Tools\bin\avrdude.conf
to…"
Make sure that you have the latest MHV AVR Tools and copy the
C:\Program Files (x86)\MHV AVR Tools\bin\avrdude.conf
to…"
"Hi Randy.
I have a Tricopter and have some issues with Poshold.
In RC3 Poshold startded to drift really hard sometimes if i flyed the Tri really extream with alot of quick turn ect.
But today i tested RC4 Poshold and totaly lost controll in…"
I have a Tricopter and have some issues with Poshold.
In RC3 Poshold startded to drift really hard sometimes if i flyed the Tri really extream with alot of quick turn ect.
But today i tested RC4 Poshold and totaly lost controll in…"
"I found and installed Arduino 1.0.3-gcc-4.7.2 and arducopter 3.2-RC3 is compiling perfectly now.
Thanks for your help."
Thanks for your help."
"I using this one.
http://ardupilot.com/downloads/?did=45
Is it the same?
The link to the arduino.zip that you sended doesn´t work at the moment......"
http://ardupilot.com/downloads/?did=45
Is it the same?
The link to the arduino.zip that you sended doesn´t work at the moment......"
"I have try to disable everything except gimal and poshold flight mode.
And the sketch is still too big!
Binary sketch size: 259 044 bytes (of a 258 048 byte maximum)
Is this normal?
Do i have the correct file? I saw that there where a file named…"
And the sketch is still too big!
Binary sketch size: 259 044 bytes (of a 258 048 byte maximum)
Is this normal?
Do i have the correct file? I saw that there where a file named…"
"Hi.
Im trying to compile RC3 in ArduPilot-Arduino-1.0.3-windows for my tricopter but having trouble.
I have a SSG gimbal so i need to change the servo out for the camera mount, so i need to compile it myself.
Arduino says that the "Sketch is too…"
Im trying to compile RC3 in ArduPilot-Arduino-1.0.3-windows for my tricopter but having trouble.
I have a SSG gimbal so i need to change the servo out for the camera mount, so i need to compile it myself.
Arduino says that the "Sketch is too…"
"Hi,
I have tested the 3.2 RC2 on my Tricopter and i have one issue.
When i arm and start the takeoff the tricopter wants to yaw around 45-90 degrees.I have never have this problem in the other old versions of Arducopter.
I can see that there been…"
I have tested the 3.2 RC2 on my Tricopter and i have one issue.
When i arm and start the takeoff the tricopter wants to yaw around 45-90 degrees.I have never have this problem in the other old versions of Arducopter.
I can see that there been…"
Hi all.I have problem with Servo vibrations in my gimbal, and have been testing several types of servon but not been satisfied with the results.This guy seems to have exactly the same problem as i have but in an Multiwii FC. And manage to created a…
