"To change the visibility of NFZ on the map in UgCS, click on the Map options (icon globe) button at the very top righthand corner of the screen and click on the Layers button. In the window you will be able to deselect Aerodrome zones or Custom…"

"Rowan,thank you for the clarification.
As mentioned before - joystick support for DJI drones is planned to be implemented in UgCS in approximately 2-5 months.
We announce upgrades of UgCS on our webpage www.ugcs.com, on Facebook:…"

"Thank you for the topic.
Unfortunately, for DJI drones, it is not yet supported. Because in general, you can control camera using RC. By the end of the year, we are going to enhance our Enterprise version. It will allow remote operators to control…"

"Please set port name manually in the config file (C:\Program Files (x86)\UgCS\bin\vsm-ardupilot.conf).In your case it will be:vehicle.ardupilot.serial_port.1.name = com4

Best regards, Sergey Zuev"

"Dear Nir,
Maybe you sending the command to the vehicle which does not support this command (2-th in your list).Please read supported commands of vehicles in "Drone specifics", p. 61 in "User…"

"Dear Nir,

Could you send me the full log and new your programme?

Best regards,Sergey Zuevwww.ugcs.com/support"

"Dear Nir,
Please use the following example:
using System;using System.Collections.Generic;using System.Linq;using System.Text;using System.Threading.Tasks;using UGCS.Sdk.Protocol;using UGCS.Sdk.Protocol.Encoding;using UGCS.Sdk.Tasks;using…"

"Dear Henry,
The developers have proposed to add two lines to the file:vstreamer.videodevices.exclude.0 = Microsoft Camera Rearvstreamer.videodevices.exclude.1 = Microsoft Camera Front
file:C: \ Program Files (x86) \ UgCS \ bin \ vstreamer.conf"

"Dear Peng,
Please see APM connection manual:https://www.ugcs.com/files/PDFs/Manuals/v2.9/manual-ardupilot.pdf
Do not forget to run the required VSM (in the system tray).
Please, write to me or support@ugcs.com is it works for you or not.
Best…"

"Dear Danilo,
For 4 Phantom EXIF data recorded autopilot copter, UGCS can not influence this process.It may be better to process third-party application these pictures?Or change the firmware autopilot.
 Best regards, Sergey Zuev"

"Dear Danilo,
You can use the functionality "Geotagging" after the flight, but only if the clock on the camera and the computer are the same.For more information you can read on page 67 of the document "User…"