"Hugues, in the first part with the strnage joystick (novint falcon) are send, the velocity commands that the copter follows, is like the loiter mode in Arducopter but with only one Joystick."
"Hi Mike, i´m also working with the maxbotix sensor using the PWM output, i didn´t find any other reason for the noise, more than the motors because when the motors are off the signal is solid lke you say, but when it´s flying it shows a measurement…"
"Thank you Chris, i´m not working with the dev team, once Randy contacted with me for the implementation of the optical flow stabilization, i could implement the px4flow overriding one flight mode on Arducopter firmware and sent the link to Randy but…"
Hi everybody, i would like to show you my advance with the teleoperation topic, the main objective is use the Novint Falcon to operate the copter, avoid collisions and feel the velocities and distance to an obstacle by the force feedback. The…
https://www.youtube.com/watch?v=3LMaO3o5t3E&feature=youtu.beHi, i´m making my own firmware based on the ArduCopter 3.2 Libraries, i have implemented various flight modes like STABILIZE, LOITER, ALT HOLD, RTL, AUTO, but changing the control law and…
"Hi, i´m using Arducopter libraries to make my own firmware to fly my copters, i dont know if its a bug only for the pixhawk, because i was using the optical flow sensor PX4Flow (via i2c ) in the APM and works with Arducopter 3.2 libraries, but now i…"
"Hi, i just received my Nexus 7, firstly i tried to connect with mission Planner and Androipilot with stock rom and kernel, but no response, after, i flashed theTablet with cyanogenmod and works very well, (Andropilot works verywell, mission planer…"