About

Please tell us a bit about your UAV interest

Got involved with UAV's through usage at work. One of the better jobs I get to work on!


Hometown:

Ontario, Canada


Activity Feed

Steve Cudmore replied to Steve Cudmore's discussion UgCS for DJI App Crashing & UgCS Unable to Upload Routes - Command Timeout in UgCS
"We have UgCS 3.0 and the previous version of Ugcs for DJI before the update a few days ago. We will update to the latest mobile app and report back after our next flights.

Thanks"
Aug 16, 2018
Steve Cudmore replied to Steve Cudmore's discussion UgCS for DJI App Crashing & UgCS Unable to Upload Routes - Command Timeout in UgCS
"Yesterday the UgCS app for DJI crashed 6 times when flying for roughly 5 hours. Most of the time these app crashes occurred in the middle of Photogrammetry flights. This caused us to have to go back and fly certain lines within the Photogrammetry…"
Aug 16, 2018
Steve Cudmore posted a discussion in UgCS
We're having a few ongoing issues with UgCS were looking for help with.1. UgCS for DJI App Crashing. It seems like the app crashes quite alot. Sometimes this happens during flight and requires a reboot. We have the most up to date app. Hard to…
Aug 13, 2018
Steve Cudmore replied to Steve Cudmore's discussion Photogrametry Missing Pictures UGCS in UgCS
"Not sure how to post XML files here without uploading externally - I sent the mission file to the email ugcs@ugcs.com."
Jul 27, 2018
Steve Cudmore replied to Steve Cudmore's discussion Photogrametry Missing Pictures UGCS in UgCS
"Not sure how to post XML files here without uploading externally - I sent the mission file to the email ugcs@ugcs.com."
Jul 27, 2018
Steve Cudmore replied to Steve Cudmore's discussion UGCS Battery % showing 0% but Voltage Normal A3 in UgCS
"OK thanks for the info"
Jul 27, 2018
Steve Cudmore posted a discussion in UgCS
We're having issues with our photogrametry flight routes missing taking some pictures.We thought flying at 3m/s horizontally may have been a culprit but even with a wait set at 1 second before snapping a picture at each waypoint - the odd time the…
Jul 26, 2018
Steve Cudmore replied to Steve Cudmore's discussion UGCS Battery % showing 0% but Voltage Normal A3 in UgCS
"Hi Artūrs,

Is the 0% battery indication part of the newer versions of UGCS vs older versions? We've been flying since V2.13 and never had this 0% indication before with non-DJI batteries.

Thanks,
Steve"
Jul 26, 2018
Steve Cudmore replied to Steve Cudmore's discussion UGCS Battery % showing 0% but Voltage Normal A3 in UgCS
"Anyone?"
Jul 26, 2018
Steve Cudmore posted a discussion in UgCS
Has anyone had this problem with the battery percentage showing 0% with an acceptable voltage? This is on a custom airframe with an A3 Pro controller & LB2. Has this display in both the desktop and mobile version. The DJI Go app doesn't show…
Jul 25, 2018
Steve Cudmore replied to Jorge Valencia's discussion UCS not connected (always gray) in UgCS for DJI in UgCS
"Hey Jorge ensure that the IP address and port settings for both softwares are the same on both devices.

Go into the menu on the tablet and scroll down to the very bottom where it gives you the IP address and port. Keep that open and then open up…"
Jun 14, 2018
Steve Cudmore replied to Steve Cudmore's discussion Quadcopter Emulator Issues in UgCS 2.13 in UgCS
"Thanks Alexey that explains alot. I'm not sure how I didn't see the fixed wing picture on EMU-102 :?

Thanks again.

Steve"
Jun 14, 2018
Steve Cudmore replied to Steve Cudmore's discussion Quadcopter Emulator Issues in UgCS 2.13 in UgCS
"Hey Alexey,

I changed the emulator I was using from EMU-102 to EMU-101 and my problem went away. I am not sure why, but needless to say I will stick with EMU-101 from now on.

This simulator that you mention would work great for other flights…"
Jun 11, 2018
Steve Cudmore replied to Steve Cudmore's discussion Problems Performing 'Straight' Flight between Waypoints of Different Altitudes - UgCS in UgCS
"I'm having trouble exporting the telemetry data. Is there any way of exporting just some of the telemetry from the flight of interest?

Thanks!"
Jun 11, 2018
Steve Cudmore replied to Steve Cudmore's discussion Problems Performing 'Straight' Flight between Waypoints of Different Altitudes - UgCS in UgCS
"I went back and checked - the flight was uploaded with waypoint 1 and 2 separated by 17m and again by 35m.

I also forgot to mention in my earlier post that the emulator has no problems simulating the flight."
Jun 11, 2018
Steve Cudmore posted a discussion in UgCS
Has anyone successfully flown diagonally between two waypoints at different altitudes using the "Straight" Trajectory type and a pre-programmed flight in UgCS? We are attempting to fly our drones like a fixed winged aircraft, meaning no pure…
Jun 8, 2018
More…