I am an avid aero modeler with intermediate flying skills.
I won the IIT Mumbai Tech Fest 2009 Glider Mr MOSS. I want to convert Mr MOSS to an autonomous flyer
"Hi Chris ,
I am wanting to build my own autopilot during my holidays from April to June .
I have bought all the ardu components and was going to assemble them , but thought why not make a basic one myself , came across this and thought it might be a…"
"got time to test between exams , with a bit of tuning have been able to reverse the servos and the hand over take over is quite smooth between auto pilot and manual.
I operate with a Futaba 6 Exa RC and have assigned the manual to auto shift to…"
I loved the way the Easy Glider Pro flew but it had a Problem from the FPV Point of View it had a front Mounted Prop which was causing disturbances in the camera hence had 2 options1) Convert to twin Motor2) convert to pusher .Decided to go for the…
"Sorted out the Wing Flex by running an aluminium Round tube for the entire length as a SPAR instead of a short length as a wing joiner .
Made the Camera and Equipment Tray as a kind of a reverse aero foil of the wing below it for around 6- 8 inches…"
"I finally got the aurdu pilot fitted up , GPS Locked adjusted trims etc on my MPX Easy Cub .
Two observations :
1) When I switch to auto pilot the plane goes into full throttle and elevator goes full down even in the ground test .
2) Took off…"
"Thanks that was Prototype 2 the rudder is extra sensitive my feeling is that the sides of the Box are acting like vertical stabs which amplify the rudder movement in some way . So I am thinking of reducing the throws OR the Rudder area will try…"
After the Huge MOSS 4 X it was time to make a small day to day FPV platform .After flying FPV over the past few months I found that a pusher OR a twin motor set up is the best for FPV rather than a nose mounted Motor .So was born the Idea of MOSS…
Modified my glider Mr MOSS to be suitable for FPV and UAV applications hence I created MOSS Box and also the Big Bird MOSS 4 X . Got myself a FPV Set up with remzibi OSD as well. in the process of setting up the ardu pilot .Here are a few video's of…
Hi ,I am a student studying in Class X in Chennai .I won a Gliding competition held by IIT Mumbai Techfest 2009 with my scratch built Glider Mr Moss.This is a SPAD Glider with 48" wing span and a 30 " stick Fuselage . I have a power set up that can…