Gender
Male
About
Please tell us a bit about your UAV interest
FPV and ect
Hometown:
LaGrange
Activity Feed
"Using APM 2.6 FW 3.2 OSD extra Home direction arrow not working. I have set Par as
https://code.google.com/p/minimosd-extra/wiki/APM
Everything else seems to work. Any idea why ?"
https://code.google.com/p/minimosd-extra/wiki/APM
Everything else seems to work. Any idea why ?"
"Help ! I have APM 2.6 FW 3.2 Minim OSD 2.1.2.0 FW I have OSD wired as per instructions. power from APM tel port both LEDs on OSD lite (power to both sides)3rd LED flashing. FPV video good but no OSD overlay. I have powered also via UBEC (OSD) with…"
"The next thing I would do Is "Auto Trim"
http://copter.ardupilot.com/wiki/autotrim/
Make sure you TX trims are centered then give it a try worked for me."
http://copter.ardupilot.com/wiki/autotrim/
Make sure you TX trims are centered then give it a try worked for me."
"3.2.1 DJI450 APM 2.6 810Kv 10x4.5 3 cell
After making changes to PILOT_ACCEL_Z FROM 250 TO 50 and INS_MPU6K_filter = 20
AltHld is better. Today I ran Auto Mission with ROI had Alt set to 15 lost Alt on the way to first waypoint
and never regain it…"
After making changes to PILOT_ACCEL_Z FROM 250 TO 50 and INS_MPU6K_filter = 20
AltHld is better. Today I ran Auto Mission with ROI had Alt set to 15 lost Alt on the way to first waypoint
and never regain it…"
"F450 810 KV APM 2.6 3 cell 10x4.5 props 3.21FW
I have changed my PILOT_ACCEL_Z FROM 250 TO 50 and set vib to 20 from 0
Seems better will do more testing !"
I have changed my PILOT_ACCEL_Z FROM 250 TO 50 and set vib to 20 from 0
Seems better will do more testing !"
"I use a 3300ma battery. So you have the same problem as everyone else here?
If so have you been able to find a fix ?
3.5lbs is very lite for that set up . The key must be 4 cell"
If so have you been able to find a fix ?
3.5lbs is very lite for that set up . The key must be 4 cell"
"@Marko
Right now its about 4 Lb. I want to put gimbal and GoPro on board that will make it 4.5Lb.
All my other build are 1000Kv with same 10x4.5 and 3 cell. You might be right ! I was looking at 11x4.7 props (my ESC are only good to 3 cell) I do…"
Right now its about 4 Lb. I want to put gimbal and GoPro on board that will make it 4.5Lb.
All my other build are 1000Kv with same 10x4.5 and 3 cell. You might be right ! I was looking at 11x4.7 props (my ESC are only good to 3 cell) I do…"
"Thanks LTMNO for looking at my log. Been working on vibrations just had a test flight
and vibrations are better but AltHld still not good. This is my third build and never had this much problem. This frame looks like a TBS but is not TBS. APM…"
and vibrations are better but AltHld still not good. This is my third build and never had this much problem. This frame looks like a TBS but is not TBS. APM…"
"Still having the AltHld problem Changed several Parms Is the real problem vibrations ?
Pleas have a look.................2015-04-18 13-33-12.log"
Pleas have a look.................2015-04-18 13-33-12.log"
"APM 2.6 3.21 firmware 810KV 10x4.5 Deadcat frame 3 Cell
Same problem as everyone here. Made two flights today one early with wind second flight late with very little wind. No changes to Quad between flights. My second flight was 90% better then the…"
Same problem as everyone here. Made two flights today one early with wind second flight late with very little wind. No changes to Quad between flights. My second flight was 90% better then the…"
"From http://copter.ardupilot.com/wiki/common-optional-hardware/common-ca...
I have Tarot setup as above using APM 2.6 connected to RC9/A9. From MP using RC9-RC6 under gimbal setup I can not get tilt via TX . Is their any other settings I might…"
I have Tarot setup as above using APM 2.6 connected to RC9/A9. From MP using RC9-RC6 under gimbal setup I can not get tilt via TX . Is their any other settings I might…"
"Try uninstalling and reinstalling MP"
"For Windows 8 you have to disable driver signing as the drivers are signed by someone that Windows does not trust. Advanced options 7 I think and reboot.
In device manager is the comport yellow ? If not what comport # do you see ?"
In device manager is the comport yellow ? If not what comport # do you see ?"
"Might try this
http://ardupilot.com/forum/viewtopic.php?f=22&t=10875&hilit..."
http://ardupilot.com/forum/viewtopic.php?f=22&t=10875&hilit..."
