Gender
Male
About
Location
Ridgefield, CT
Activity Feed
"Hi, can someone tell me the easiest way to determine what version of code is running on my AP. I have an ArduCopter that I received 3 weeks ago with code already loaded. I am trying to get the GPS fix and GPS hold leds working on the AP. The blue…"
"Chris and Mike,
Thanks for all the great info
I'm using the 2.3.3 code with the default settings, I set up the 2 position switch on my Tx for WP mode by setting the on position to 50%. I'll try another walking test in my yard to confirm the…"
Thanks for all the great info
I'm using the 2.3.3 code with the default settings, I set up the 2 position switch on my Tx for WP mode by setting the on position to 50%. I'll try another walking test in my yard to confirm the…"
I've been test flying my easystar in manual mode and I can record good telemetry data for the flights. I tested WP mode on the ground in my yard with 2 points 100' apart and walked between them and the groundstation shows the WP change with a valid…
"I guess the html sample got stripped off the previous post. The problem seems to be that the xml namespace in the html tag is not supported in IE6"
"J have a question about the config utility. I was having a problem running the config utility on machines that are running IE6. I found that this doesn't work on IE6 but does work on IE7
If I replace this with all seems to be working on IE6. The…"
If I replace this with all seems to be working on IE6. The…"
I'm starting to assemble an EasyStar. I understand that the attopilot xy and z sensors can be used. Are there any configuration changes needed in the ArduPilot code to support these sensors?Thanks in advance-Walt
