Gender
Male
About
Location
Spring, TX
About Me:
R/C & Arduino junky.
Please tell us a bit about your UAV interest
First UAV under construction, 3DRobotics Hexa-B kit.
Hometown:
Spring, tx
Activity Feed
Hey folks, I found a really simple, quite ingenious, camera gimbal that was originally designed for a flashed KK2 board. See this link on RCGroups. http://www.rcgroups.com/forums/showthread.php?t=1793759&highlig... completed the assembly, and…
"Hey Folks,
Really, thanks for all the thoughts and discussion around my problem here... And for that I have an update on a couple of things.
First, Receiver is now talking through the APM. I don't know what changed, but here's what I did.
I…"
Really, thanks for all the thoughts and discussion around my problem here... And for that I have an update on a couple of things.
First, Receiver is now talking through the APM. I don't know what changed, but here's what I did.
I…"
"Ok, here are some pics of my connections. I've tried to show everything from the PDB to APM to Rx.
IMAGE #1: You will notice a couple of things. First I did not follow the colors recommended in the guide (I got reversed when I started soldering).…"
IMAGE #1: You will notice a couple of things. First I did not follow the colors recommended in the guide (I got reversed when I started soldering).…"
"Agree, this is a great community.
I did the servo test and everything with the receiver seems to be working properly
Also, I see from the manual that the calibration step does not necessarily need the LiPo connected, but I went ahead and tried it…"
I did the servo test and everything with the receiver seems to be working properly
Also, I see from the manual that the calibration step does not necessarily need the LiPo connected, but I went ahead and tried it…"
"Hey Reto,
Thanks for the response... I was confused (been known to happen on occasion), but I'm not using my AR7100, but I am using my Spektrum AR7000.
Still having the same issue, no response in the Tx / Rx Calibration page in the Mission…"
Thanks for the response... I was confused (been known to happen on occasion), but I'm not using my AR7100, but I am using my Spektrum AR7000.
Still having the same issue, no response in the Tx / Rx Calibration page in the Mission…"
Hey folks,I originally posted my problem on the wall, but decided to create a discussion topic as a better way to keep the info organized.Recap - Original PostI got the Hexa-B kit, have assembled everything according to the manual. I am at the…
"Hey Chris,
Yes, I see I confused things a bit. I was just TRYING to do the setup calibration with my Rx battery connected, because it was not working with only USB connected. I do not plan to have an Rx battery once this thing is flying. I…"
Yes, I see I confused things a bit. I was just TRYING to do the setup calibration with my Rx battery connected, because it was not working with only USB connected. I do not plan to have an Rx battery once this thing is flying. I…"
"Hey Chris and Group,
I am having a similar problem as Thomas Mc Grory. The only difference is I got the Hexa-B kit, have assembled everything according to the manual. I am at the "setup" step where I am to calibrate my tx/rx channels.
I have a JR…"
I am having a similar problem as Thomas Mc Grory. The only difference is I got the Hexa-B kit, have assembled everything according to the manual. I am at the "setup" step where I am to calibrate my tx/rx channels.
I have a JR…"
Hey everyone, this is my first post here at DIYDrones, but I've been lurking for about a year now...Yesterday, I received my 3DRobotics Hexa-B kit with APM 2.5 (love the case!!), got the telemetry and upgraded the motors to the 880's.I've just…
