Gender
Male
About
Location
HE
Please tell us a bit about your UAV interest
Learn2fly uav and more with apm
Hometown:
Near Frankfurt
Activity Feed
"Works, connect frsky ppm to pin36 with 1k resistor"
"I read i can bypass the 32u2 cpu and connect ppm sumto ch5, i have frsky ppm.
Which ppsum pin goes to the APM?"
Which ppsum pin goes to the APM?"
"Sorry for my ambiguous description.... the 328 cpu will not soldered on original pins.
My idea is to flash a 328 with ppm from sourcecode and solder the right pins with wrap wire.
(I have this 328 as spare lying around)
If everything works fine, it…"
My idea is to flash a 328 with ppm from sourcecode and solder the right pins with wrap wire.
(I have this 328 as spare lying around)
If everything works fine, it…"
"Hi,
i removed my atmel32u2 from MiniAPM ... it´s fried and getting very hot.
Can i use an atmega328 instead of an atmega32u2?
BR
Frank"
i removed my atmel32u2 from MiniAPM ... it´s fried and getting very hot.
Can i use an atmega328 instead of an atmega32u2?
BR
Frank"
"I resolved this with Channel 6 and my poti .."
Hi,is it possible to switch between the pids for normal flight(fpv) and more aggressive flight for flip and rolls?I want to switch from 2.5( normal) to 4.5 and final 6-8 for flips and rolls.Is that possible to combine that with a new flight mode or…
"Yes, my baro is covered with foam and a top/bottom case.
Logs see here and thread.. it makes me crazy.
http://diydrones.com/forum/topics/apm-2-5-baro-issues-from-version-...
It seems my baro has some problems ..see here:
It´s only a short notice…"
Logs see here and thread.. it makes me crazy.
http://diydrones.com/forum/topics/apm-2-5-baro-issues-from-version-...
It seems my baro has some problems ..see here:
It´s only a short notice…"
"Anyone who use this miniapm in a 250 copter?
I have strange problems regarding baro, motor pulses fast up/down. Reducing alt P rate to half didn´t resolve the problem.
With 2S lipo the baro seems better, but 3s is preferred. I didn´t start autotune…"
I have strange problems regarding baro, motor pulses fast up/down. Reducing alt P rate to half didn´t resolve the problem.
With 2S lipo the baro seems better, but 3s is preferred. I didn´t start autotune…"
"I tried 3.2RC5 and now i see only in Mission Planner 1.3.7 bad baro health, but not in APM Planner.
2S lipos has less pulses of motors as 3s .. thr. mid was corrected each setup, also decreased alt p.
I´m running out of ideas with my miniapm…"
2S lipos has less pulses of motors as 3s .. thr. mid was corrected each setup, also decreased alt p.
I´m running out of ideas with my miniapm…"
Hello,i have a small 250 size copter and it flies, except all modes which needs a baro.Copter oscillates with alt hold +-1 meter and is also not stable with loiter and pos hold.My Baro is covered with dark foam and alt hold p is tested and decreased…
"Hi Julien,
my mistake.. i connect the external led to a7 port = Arm.
Telemetry is nice to have but my copter is too small for gadgets. Why is it uninteresting to know the sat status during flight?Is it not good to know to have a good signal for…"
my mistake.. i connect the external led to a7 port = Arm.
Telemetry is nice to have but my copter is too small for gadgets. Why is it uninteresting to know the sat status during flight?Is it not good to know to have a good signal for…"
"Hi Julien,
thx for agree.. i thought i´m blind ...
I have the GPS led connected to A6 and it´s blinking regardless of sat counts.
At first i´m happy when i have GPS lock led ..
edit:
Got it, have to arm copter and led is still on now ... :-)
Where…"
thx for agree.. i thought i´m blind ...
I have the GPS led connected to A6 and it´s blinking regardless of sat counts.
At first i´m happy when i have GPS lock led ..
edit:
Got it, have to arm copter and led is still on now ... :-)
Where…"
"Yesterday i didn´t find any copter led settings.
I want to enable GPS lock with external led.. is it disabled with 3.1.1 hybrid?
Any ideas to enable external Copter led´s in Mission planner or Arduino sources?
I found nothing absolutlely nothin in…"
I want to enable GPS lock with external led.. is it disabled with 3.1.1 hybrid?
Any ideas to enable external Copter led´s in Mission planner or Arduino sources?
I found nothing absolutlely nothin in…"
"Hybrid is No. 14, configure it in Advanced Parameters, but you can´t see it in Flightmode tab."
"Yaw drifting in the garden, are you joking?
My neighbours killing me, if i hit any car or house .... ;-)
More testing in a wider area @ weekend, also drifts and more speed.
But what i´ve seen in a short minute was awesome .."
My neighbours killing me, if i hit any car or house .... ;-)
More testing in a wider area @ weekend, also drifts and more speed.
But what i´ve seen in a short minute was awesome .."
"Thanks for your answer and new feature @Julien, i try it tomorrow afternoon with default parameters again.
These adjust parameters will be also set in full parameter list?
Will tomorrow reporting regarding new feature ,,,
Works very nice with…"
These adjust parameters will be also set in full parameter list?
Will tomorrow reporting regarding new feature ,,,
Works very nice with…"
