Gender
Male
About
Location
Campo Grande / MS
Please tell us a bit about your UAV interest
FPV
Hometown:
Campo Grande
Activity Feed
"i need to install a air speed analog what I have ..."
"Hein du Plessis, do you discovered where are the adc pins out?"
Hello friends, I have a FY650 Tarot with 4 motors 4108 360kv using a Pixhawk as Flight Controller and Arducopter 3.2 firmware. It turns out that when I trigger the RTL the drone comes to the Home position correctly, and when will make…
"Friend , I was dedicated to improve my Drone flight time just leaving it to the background , I was very interested in your code will test and see how it behaves ."
"Good morning guys
, I'm sending firmware update to make the conversion MavLink ( Arducopter ) for Telemetry Hott . It's working for now : Altitude ( Baro ) Speed ( GPS) Latitude Longitude Battery Voltage Battery current drain Distance to…"
, I'm sending firmware update to make the conversion MavLink ( Arducopter ) for Telemetry Hott . It's working for now : Altitude ( Baro ) Speed ( GPS) Latitude Longitude Battery Voltage Battery current drain Distance to…"
Good day guys !! I feel the need to obtain the information from my PixHawk in my Graupner MZ-24 screen. I foundsome threads talking about a change in arducopter firmware to run the telemetry, not good at messing original controller firmware.Then I…
"Hello Jani, It is normal to have to restart the ioboard to display the data in the screen of FrSky? Whenever I change the battery of the APM data stop being displayed after connecting the APM ioboard then restart the data back to be displayed in…"
"friends,
I flashed firmware on a arduino nano, but whenever I put a new battery must hit the reset button after APM arm have otherwise not display anything on the screen of er9x.
The configuration I have is:
APM 2.6 with 2.74 Arduplane and…"
I flashed firmware on a arduino nano, but whenever I put a new battery must hit the reset button after APM arm have otherwise not display anything on the screen of er9x.
The configuration I have is:
APM 2.6 with 2.74 Arduplane and…"
