I have a pixhawk board, I could upload AC3.2 firmware but then I can't connect the board to the mission planner. I tried different things: connect/disconnect GPS/compass module, tried on different USB port, even tried with separate power module but i
Read more…Hello everyone
I recently joined the drone fields and i've got a small issue:
My HexaCopter is not flying as it should be (the RUDDER is shifted to the ALI stick and the opposite is true)
I didnt know how to switch it back to its original location (MOD
Read more…Hello everyone
I had this brushed DC motor and I wanted to connect it with the (AquaSpeed 50) ESC that have a forward and reverse function , and then I wanted to move the DC motor with one of the sticks in my taranis plus , but unfortunately I didn'
Read more…Hello everyone
I am planning to connect a 12v dc motor with the pixhawk and rotate the motor clockwise and anticlockwise. with my taranis plus transmitter is that possible ? if any one have an idea how to do it please let me know.
The idea is to use o
Read more…Hello everyone
I am new to this field and I would like to ask about the right platform that could be used according to the devices I am using:
I am using a OSX
PIXHAWK
Taranis plus transmitter
X8R receiver
and trying to arm a Hexa copter
What's better to
Read more…guys I need help with my taranis setting
The yaw is in the pitch and the pitch in the yaw location!!
how can I switch between the two?
Read more…Hey everyone
I am using APM Planner 2.0 and I didnt know whats 3D accelerometer calibration!!
How to configure my Pixhawk ? with this method (3D accelerometer calibration!!)
In the previous versions I see come commands like:
turn the vehicle to the left
Read more…Guys I need help
I am using a Pixhawk , a X8R receiver and a taranis transmitter.
I am trying to configure my Pixhawk but when I reach to the Accelerometer Calibration I click on the calibrate button I don't see the instruction line which says
Place A
Read more…How to know if my Pixhawk is working or not ?
Read more…Accidently, I burned this caple yesterday while I am testing my Xcopter I connected this connector (-) with the battery +and the opposite. I am new to this field so i took it off immediately.
However when I changed the burned connecter with A new on
Read more…12915034_10204283455284999_1425167310_o.jpg
12903492_10204283455244998_1557075873_o.jpg
Accidently, I burned this caple yesterday while I am testing my Xcopter I connected this connector (-) with the battery +and the opposite. I am new to this field so
Read more…guys I need help my quad X copter has a small problem when I move my taranis right panel to the right the drone goes to the left and the opposite is true any one could help ??
I ve been told its something with the channels !?
if anyone knows how to fix
Read more…