Gender
Male
About
Location
Philadelphia, PA
About Me:
i am....
Please tell us a bit about your UAV interest
want to fly by wire
Activity Feed
hello all i just lost my apm2 in a bixler with the diydrones chassis.i took off flew through a few batteries and when testing rtl for the first time the plane just seemed lost i don't know if it is because the gps had a bad view in the chassis…
"does that mean i input -12.9 into misson planner?"
NEGATIVE declination means I have to put '-' sign before the degree.minutes number my numbers areLatitude: 40° 1' 11" NLongitude: 75° 18' 18" WMagnetic declination: 12° 9' WESTDeclination is NEGATIVEInclination: 66° 45' Magnetic field strength:…
"no your not done... that switches (one from ebay) resistors are for turnigy v2 firmware not er9x or any of its variants.... here is a https://www.youtube.com/watch?v=n5DpXPVTGzE&feature=fvsr youtube video of someone explaining step by step how to get…"
"according to gcs via telemetry "initialising" comes on every few minutes even though the plane is not in motion.....
putting in multiple inputs into the plane such as moving the elevator up or down or moving the ailerons to many times seems to bring…"
putting in multiple inputs into the plane such as moving the elevator up or down or moving the ailerons to many times seems to bring…"
i have a brand new apm 2.0 and i loaded the arduplane firmware and i have wireless telemetry. the control surfaces only move freely when i have the board plugged into to usb. when powered by a battery in manual mode the planes control surfaces…
"I'm very interested in using this. i tried the eepe.exe and it wont run any suggestions to get this working currently?
Thanks in advance"
Thanks in advance"
hello i just purchased and adupilot mega 1280 from a fellow member on here and im having trouble loading firmware. the mission planner tells me to upgrade when trying to load through there. Is there any stable build that supports the 1280 and if so…
