After a week of tuning and tweaking with PIDs i finally got every thing right. So i thought i should put the system on real test. Went for Auto Takeoff and then couple of way points and reached 10 km and then return back to home and auto land. During
I am using 3DR APM 2.5 with 3DR PM and Minimosd from the last 8 months or so. Today i run into problem while having a routine flight. Please notice that i haven't change any major setting in parameters and just added couple of WP and changed some
Hi guys i am trying to find a way to check the rudder response when in the stabalize mode meaning is it normal or reverse. Is it right to check that after doing rudder - aleron mix the movements of Aleron moving right should reflect the rudder to lef
I have configured both panels in OSD tool and saved them as per advised. I can switch between OSD screen completely off and the 1st panel, but when i switch to 2nd panel it stuck and i can only see the characters that i have set for 2nd panel but the
I was doing some testing on APM 2.5 and aurdplane 2.74b and noticed that fail-safe is working fine in manual, stabilize and FBWA modes but when i switch to auto or loiter mode the fail-safe does not work even GCS is displaying Fail-safe activated.