Blogs

Getting six fly modes on Futaba T10CAG transmitter

Posted by Wattas on January 12, 2012 at 12:59pm

We use for example CH5,switch C-3positions and switch D-2positions.

Settings:

1. Transmitter END POINT menu-GEAR -100%3689440774?profile=original

2.SUB-TRIM menu-GEAR -0

3689440674?profile=original

3.AUX-CH SELECT menu –CH5-Ls1(Logical switch)

3689440712?profile=original

4.LOGIC SW menu.Settings as shown on left.

3689440791?profile=original

 5.PROG.MIX1-8 menu choose mix 5

3689440685?profile=original

 6.P.MIX5  page 2/2 settings as shown

3689440808?profile=original

7.GYRO SENSE menu settings-CH5 and switch C as shown.

3689440728?profile=original

 8.GYRO SENSE  menu position 2 to ON.

DSCF9571.jpg?width=500

 9.C switch up,D switch up and set 68%.Pulse with in this set is 1166µs.

DSCF9573a.jpg?width=500

 10.C switch middle position,D switch up and set 48%.PW-1264µs.

DSCF9574a.jpg?width=500

 11.C switch down,D switch up and set 16%.PW-1423µs.

DSCF9575a.jpg?width=500

 12.P.MIX5 menu tab2/2 turn MIX ON.

DSCF9593.jpg?width=500

 13.P.MIX5 tab1/2 C switch down,D switch down and set -(minus)71% at poin5.PW-1554µs.

DSCF9582a.jpg?width=500

 14.C switch middle,D switch down,set -(minus)76% at point1.PW-1683µs.

DSCF9583a.jpg?width=500

 15.C switch up,D switch down and set -(minus)71% at point5.PW-1814µs

DSCF9585a.jpg?width=500

 16.Now P.MIX tab2/2

DSCF9586.jpg?width=500

That's all.There are other ways to do it,no doubt.

E-mail me when people leave their comments –
Follow

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Max Yeo June 25, 2012 at 7:56pm

    Futaba 10CAP

  • Developer
    Adam Rivera June 25, 2012 at 7:52pm

    You sure you have the same radio? I just went through this process tonight and it worked for me.

  • Max Yeo June 25, 2012 at 7:50pm

    I did follow every steps ... but still can't get 

  • Developer
    Adam Rivera June 25, 2012 at 6:53pm

    How the hell did you figure this out? :-D

  • John Campen June 25, 2012 at 5:06pm

    yes I have all six working well and this tutorial works if you follow it by the letter

  • Max Yeo June 25, 2012 at 8:47am

    anybody managed to get all 6 modes on 10C ???

  • james sowell June 15, 2012 at 11:12am

    http://diydrones.com/profiles/blogs/acmapm-futaba-t8fg-super-mode

  • Max Yeo June 15, 2012 at 10:44am

    my 10C range too narrow .... I followed the instructions above only managed to set 2 mode ....

  • Nigel Conliffe June 3, 2012 at 9:42pm

    Outstanding!!!

    Thank you -- saved me a lot of pain.  I'm still not quite sure what I did, but it works!

  • John Campen January 29, 2012 at 8:17am

    FANTASTIC!!!  I was nutting my way through the very crappy Futaba manual and nearly driving me to normal!! god forbid that should happen.. Thanks for the great tutorial. 

This reply was deleted.