Comments

• 

  Mike Boland February 1, 2013 at 11:47am

  I have a hex that will theoretically lift 9Kg, it's just a question of thrust, and of course, battery consumption.
• 

  Gonçalo Abreu February 1, 2013 at 3:29am

  I think the question is:"would an hexacopter still fly with a 2,5kg payload if an motor was lost?"
• Randy Brazeau January 31, 2013 at 4:18pm

  Would a hex copter carry a 2.5 KG payload such as a camera comfortably?
• 

  mike bearden January 27, 2013 at 11:58pm

  Well I have put my Naza up for sell so I can get the APM I am ready to do some waypoint flying
• Dan Tanner January 24, 2013 at 11:55pm

   Hello all you ARDUCOPTER folks !

  I just joined your fantastic group and am wanting to know if anyone of you folks are in SW Washington State, close to either the Longview/Kelso area or the Chehalis/Centrailia area ? I would like to talk to some of you folks about the cool ARDUCOPTER and its features, I have many questions ! As I am now Retired,Retarded and RELIEVED.....and pushing 63 yrs old,,, eeeewwww ! ! !

  I have some time on my hands to do lots of hobbies I never had the time to do. If anyone is interested on contacting me please feel free to e-mail me ... cruisin_682002@yahoo.com  I would appreciate any and all the help and advice you may give ! Thank You Folks and this is just a Great Web Site with the most interesting things to do !!!

  Thank You for your time !        ...... Dan
• 

  William millette January 22, 2013 at 5:12pm

  Futaba T8J Radio Users With Apm 2.5+ Experiencing any Motor Spikes And or Unwanted Commands?

  Tried Flashing Apm Atmega Chip And Couldent Connect?

  Would Like To Know Any History On Apm Inability to load Firmware Patch  and any Fix Other Than Swaping Radios.....

   

  thanks
• 

  Andre Kotze January 21, 2013 at 2:36am

  Does anybody know if the ArduCopter Quad-C Frame parts are available in CAD format anywhere?
• 

  Shyam Balasubramanian January 19, 2013 at 12:38pm

  Hi @Reto,

  You want to achieve this using Servos directly? If I understand correctly, you want to be able to move the servo head to click photographs? What is DO_DIGICAM_CONTROL, can you explain that more precisely?

  Also, I think better would be to start a new forum as this looks quite jampacked.

  Regards..
• 

  Reto January 19, 2013 at 12:13pm

  Thx Shyam. I'd read your post recently but it doesn't help in my case.
  I'd like to mechanically time lapse trigger my RX100 cam through a servo (no IR or usb trigger). I hoped maybe the DO_DIGICAM_CONTROL could be linked with  some time lapse counter.
• 

  Shyam Balasubramanian January 19, 2013 at 10:48am

  Hi @Reto,

  I have posted a similar question on Forum and later brainstormed and wrote a code. I think this is what you might need (will work for even APM 2.5):

  Here you go!: