Does compassmot afect the way a quadcopter lock yaw in stabilize? thanks in advance.you can see if you watch this video closely what i'm talking about, the yaw doesnt lock very well and its a very calm day can you help me understand this telemetry…
"So i decided to change the motors to a smaller ones and use a 3s setup instead with plastic props.
Here are the result in a stable hover:
I'm also running 3.0.1 and experiencing toilet bowl. But i have yet to do compassmot.
I'm very happy now :)…"
"is my copter tracking well or do i need to work the pids?
My setup is:
Tarot fy650 quadcopter
Turnigy multistar 390kv
Hobbyking 30amp esc with simonk firmware(latest version)
turnigy wooden props 15x4.5
4s nanotech 4000mah battery
"Hey,
My setup is:
Tarot fy650 quadcopter
Turnigy multistar 390kv
Hobbyking 30amp esc with simonk firmware(latest version)
turnigy wooden props 15x4.5
4s nanotech 4000mah battery
I'm having trouble calibrating the pids and i think my quad is not…"
I'm having vibartion problems and i'm going to try to describe this to my best extent. I'm really out of ideias and cant eliminate the vibrations. I'm running 2.9.1 but i would really like to try 3.0 sucessfully( i had vibs.. wasnt successfull).My…
"I cant to the live calibrating procedure. I get a compass_ofs_x of -214,678. I've tried numerous dances! I'm running APM 2.5. Also, what is orientation -.> ROTATION NONE?"
"Hey guys,I tried using these files from this thread with NEO-6m and APM 2.5. I'm also using firmware 2.9.1b. When i use loiter mode my quad sometimes towels in a direction like the gps is telling the apm its position has changed drastically. I also…"
"Funny thing happened to me yesterday. I have a fully fuctional APM 2.5 qith NEO-6M. Every mode is tested and it works. But for some reason i activate LOITER, it worked for like 10 sec, and then it shooted in a direction until i activated STAB mode…"
"Next release will bring huge improvements. I dont think 5 meters can be reduced because the GPS accuracy is limited by the USA to that range(obvious reasons). But you can improve its precision with something called inercial navigation, and filters,…"
"Well i had an MPNG board and i remember not erasing the board after an update provoced the event i'm feeling now. Quad doesnt not stabilize and is twichy in all the direction no matter what i do. I'm going to try to erase the board, perhaps thats…"
Hey,I'm not really a begginer but this is my first big quad and i need some advice.My setup is:-Tarot fy650 frame-hobbyking blue esc 40amp-multistar 390kv-4s 4ah battery-15x4.5 wooden props-APM 2.5-Weights 1.8kgDoes anyone has a similiar setup that…
EDIT:discovered the problem, timming issue with simonk firmware, im using and older releaseSo i was ready to buckle up the go pro for a test flight and this started to happen(notice the hissing sound and what happens when i bank left). I already…