Making a phototransistor cable for Canon S110
I want to make a phototransistor cable for my S110 to attach infront of its red eye LED light and connecting it to pixhawk in order to imporve the geotagging process. But I am fairly new with electronic, wiring and soldering stuff.Thus I need help and guidance on how to properly make one. I want to know is this the right connection for me to make the cable.Any help is really appreciated. Thank you.
Read more…
Comments
Thanks Klaus, I guess I'm the 1000th member.
Regards,
Herzlichen Glückwunsch an das 1000. Mitglied unserer Pixhawk Gruppe :)
Bernardo, I switched cables, not the problem. The power is from my big tower, and is main-board power-it's fine too.
When it works there's a lot of light activity that I don't understand. I hate not understanding. I need to educate myself. Can someone point me to a manual that explains such things?I've looked, and the PX4 manual does not speak about pixhawk-specific things.
@ James Miller: Perhaps the power of the USB is too low. Try connect the Pixhawk with a short cable direct to an USB plug (?) or try a different cable
If I keep trying and finally get it to light off with battery, I am able to load Qgroundcontrol, but not flash firmware. It says to unplug battery.
Help!
Anyone had this problem before? It's been in my drawer for 6 months, so HK sure aint gonna want to see it back!
http://ardupilot.org/ardupilot/index.html
Hello,
I have a Pixhawk PX4 Flight Controller and I want to use it with the PHANTOM 3 PRO 4K Camera https://hobbyking.com/en_us/phantom-3-accessory-spare-part-4k-camer.... Can you help me to connect this camera to my pixhawk and get it worked.
Best regards
@C K:
You should try uploading the firmware again and see if, maybe, your vehicle is DISARMED when the blue lights are blinking.
For further understanding of your problem you could attach your DATA LOGS and someone could take a look into it.
Regards.