About Me:
I'm just flying since a few years. Now i will change btw. expand my helis with multicopters.
About
Please tell us a bit about your UAV interest
I'm interested in octocopters with FPV and will take some landscape videos (GoPro hd2).
Activity Feed
"Hey!
After some problems, I reconfigured my mag (rotation roll180 > none) and recalibrate it. Also I bought a new GPS (uBlox NEO-M8N) because my gps data are not really good. Today I start the next flighttests. But they are really bad. :-( First…"
After some problems, I reconfigured my mag (rotation roll180 > none) and recalibrate it. Also I bought a new GPS (uBlox NEO-M8N) because my gps data are not really good. Today I start the next flighttests. But they are really bad. :-( First…"
"I doesn't received it. I still wait. The pictures shown a NEO 7M (I think) with 5883 (printed on it). But I think, the description is correctly and only other pictures used..."
"I've ordered a new GPS antenna: http://www.drotek.fr/shop/en/home/512-ublox-neo-m8-gps-hmc5983-comp... (I took this an not csg, because it's come from eu, costs only 1/3 (with tax from csg) and it's better to mount it on a rod - a little bit higher…"
"Hey! Thank you very much. My english isnt the best. ;-) By configuration I choose the gps/compass symbol (not pixhawk), because i have mount this modul in correct direction... Was it not correct?? Should I change it to RotationNone?? In one of our…"
"Hey!
Some words before I start: I've build an X8 with pixhawk 2.4, ac 3.2-rc5, ublox lea 6h and hmc5983 mag. I calibrate after installation accel and mag. The heading was correctly in MP. In last days I'm working on an externer mavlink-reader and…"
Some words before I start: I've build an X8 with pixhawk 2.4, ac 3.2-rc5, ublox lea 6h and hmc5983 mag. I calibrate after installation accel and mag. The heading was correctly in MP. In last days I'm working on an externer mavlink-reader and…"
Hey! Do somebody know, how I can connect the PX4FLOW module to the Pixhawk? How can I find a wirering-graphic? Is the actual (AC 3.2 RC3) compatible with the mounted sonar on the PX4FLOW module? Which settings I must use in the missionplanner? Best…
Hey!I'm build an Arducopter X8 with pixhawk and eight MN3110-26 (470Kv) and 15x5 props. The datasheet means, that one motor need max. 12A (with this setup). The max. current of this motor-type will be 15A (another setup). I will fly with two 4s5000…
"I've updatet to the latest FW (Hexa / 08.05.). After some tries, I could connect to terminal. I goes to setup and enter motors. But there are no motors spins. I also pushed the ARM-Button and retried this (3 short and the other one with continous…"
"I think I've a little problem: I've build described hexa-copter. Yesterday I screwed the props and connected the lipos. I armed the copter and took a really little bit throttle and hold the copter by hand from top. But the motors took so much power.…"
"Hey!
Actual 2.9.1b Hex-Firmware is uploaded, minimOSD, 3DR radio telemetry are installed, declination and radio-controller is configured. All motors runs on, but I've a little problem:
If I connected it to MP or QGround, the sensors send a moving…"
Actual 2.9.1b Hex-Firmware is uploaded, minimOSD, 3DR radio telemetry are installed, declination and radio-controller is configured. All motors runs on, but I've a little problem:
If I connected it to MP or QGround, the sensors send a moving…"
"Hey!
I've some questions to the new PX4. I install the windows-usb driver and then the latest FW PX4FMU und PX4IO. After some issues with my pc I could connect. I don't know where the problem was. On our noteebook it was no problem (both win7 64 bit…"
I've some questions to the new PX4. I install the windows-usb driver and then the latest FW PX4FMU und PX4IO. After some issues with my pc I could connect. I don't know where the problem was. On our noteebook it was no problem (both win7 64 bit…"
"Thanks very much. I still wait for my new ublox gps. :-)"
Hi!I've a APM 2.0 with the soldered onboard Mediatek GPS and magnetometer. Now I want to buy a uBlox LEA 6 GPS module. Can i use it parallel to the onboard GPS? Or is it not possible?If I can use it, which cable I must use (uBlox to APM) and where I…
Hi! I'm using one 3DR 433 MHz Kit for my Arducopter (telemetry). Now I want to create an second control-system for cameras. Can i use a second 3DR radio kit on 433 MHz (900 is not allowed in germany) for my control-system? Which settings I must take…
Knows somebody the max refreshrate for Turnigy Plush 30a ESC from hk?Best regaards :)
Hi!I found the Copterlink project: http://code.google.com/p/copter-gcs/wiki/CopterLinkDo somebody knows, whether i kan use the 3dr telemtry kit (https://store.diydrones.com/3DR_RadioTelemetry_Kit_433Mhz_p/kt-tele...) instead the xbee…
