Hi All.
After a long time away from using APM I was recently lured back.
Unfortunately it's not been "plain sailing". I hope one of you can help me with an issue I have been experiencing for the last 5 days or so.
I have my old APM 2.6 fitted to a cheap
Read more…Everywhere I read speaks about using channel 7 to add a waypoint, but I'm using a spectrum dx6 (was on the list of allowed pixhawk radios)
Is there a way to add a waypoint without using channel 7?
Thanks!
Read more…Hello,
I am new to python scripting in Mission Planner ( on Windows).
Why mission planner not able to find libraries like os and numpy.
Following import are failing in Mission planner
import os
import numpy as np
How do I make this work in my Mission planI make engraved FAA & telephone number tags. You can check them out at my Ebay store:
http://stores.ebay.com/gregs-engraving
or contact me directly at gregsprowl@yahoo.com
Read more…Hello Everyone,
I just updated Mission Planner to ver 1.3.41 build 1.1.6110.31287 and have started seeing errors in the flight paths generated by the Auto WP:Survey (Grid) option. Whereas in the Flight Plan:Survey Grid window the flight paths are squ
Read more…Hi
, i want to switch from 3DRobotics to something else. For my project i need to be able
-to upload from my groundstations data to four servos/tools on the matrice
-to download information from four extra sensors as well as the information from the gui
1. First of all if I duplicate question please let me know I can close this topic and move to different one.
2. My camera setup allows me to stream 640x480 video signal over LTE and record it same time. There is of course latency during streaming but
Read more…I got my hex flying great but now I'm getting greedy and want to get live video feed into my tower app. I've tried several different port numbers bubut haven't been able to find the right one and the internet has not helped. Is there a way to find th
Read more…I cannot save joystick configuration on Mission Planer for my quadcopter? It identifies the joystick and all inputs can also be assigned in the joystick window but cannot save it and does not show on it on radio calibration window. The radio calibrat
Read more…Hello world,
Does anyone have any hardware documentation for the 3dr Solo. In particular the IMx6 board ?
I am interested in finding out what the 1mm pins on that board map.
Essentially I am trying to re-program the linux on-board that board to be an
Read more…Hello there,
i had a problem with my apm. After firmware upload, the apm stopped work. Only green light(alive led) turn on when powered, and no mo recognized from mission planner.
When i plug/unplug i can hear the dlindlon sound from windows 7, i can s
Read more…Lets discuss this together guys Well as we see the connex prosight is rocking the rc field with it is wonderful price but the range is still limited while some guys boost it to 4km and ibcrazy boosted to 4.5 km as i remember with only bigger antenna
Read more…1. i reading about MAVlink and i try to read packages from pixhawk fly controller.
I thought of another way to make the call and i want to know from this discussions readers if its ok and what are you think
On my reader .. i read the two first byte f
Read more…As indicated in the title, and from the attached picture, none of the frame configuration fits my hexacopter be it hex 'X' or '+' configuration.
Perhaps:
1. Use hexacopter 'X' configuration?
2. Use hexacopter '+' configuration?
3. Or there's alternative
Hi all,
I am using a pixhawk and ardurover (v3.01) to control a RC boat.
I am using mission planner v1.3.41 using an RFD 868+ set to link to the boat, The antenna's and radios were bought 2 months ago as a kit from rfdesign,
While trying to connect, I
Having a slight issue maybe somebody else there can point me in the right direction.. problem I'm having is with my chaotic 3D quad, recently had a ESC burnout they replaced the ESC and now with the new ESC installed there seems to be a difference in
Read more…Hi, does anyone know how to disarm the preflight checks in tower app ao i can launch SOLO from the boat? I know there is a way to do it. I just need instructions.
Read more…Look at maytech new quick release plastic propelller for Phantom4.
What do you think?
Price: USD6.9/pair
9.4 x 5.0 inch
Here is the link I found in Aliexpress:
Maytech plastic propeller DJI Phantom4 9450 quick release props
I am new in building UAVs.
I am having some trouble with my quadcopter:
I try to arm the motors but they simply do not arm. SO I try to calibrate the ESCs an the throttle and it works fine, but I do not want to do this every time I want to fly. After c
Read more…