About Me:
An FPV enthusiastic
About
Please tell us a bit about your UAV interest
An FPV enthusiastic
Activity Feed
"No, they didn't. I ordered one and it was useless. Maybe because my laptop is RF noisy"
"First video of the Immersion RC EzUHF RSSI & Link Quality on a MinimOSD.
The RSSI value is from 0-100 with 0 best and 100 worst and Link Quality is in % 100% best and 0% worst. Just like the EzOSD.
Now I'm using channel 5 and 6 from RX and APM in…"
The RSSI value is from 0-100 with 0 best and 100 worst and Link Quality is in % 100% best and 0% worst. Just like the EzOSD.
Now I'm using channel 5 and 6 from RX and APM in…"
"Ok, I have the EzUHF RSSI & Linkquality up and running. Everything works exactley like I wanted it. Not bad for a non-coder he? Soon I will test it and make a video.
BUT:
Now I use the chan_raw values. If I want to release the code, the chan_raw…"
BUT:
Now I use the chan_raw values. If I want to release the code, the chan_raw…"
"Hi Gábor,
I was looking to do the coding myself for the EzUHF RX RSSI & Link Quality output, because I thought it wouldn't be that hard to display ch 6 and 7 in % like I said here
But it took me 4 days to find out how to download the sourcecode from…"
I was looking to do the coding myself for the EzUHF RX RSSI & Link Quality output, because I thought it wouldn't be that hard to display ch 6 and 7 in % like I said here
But it took me 4 days to find out how to download the sourcecode from…"
"Hi Gábor,
I have an EzUHF receiver which has a RSSI needle and a Link Quality needle.You can assign these needles to particular channels on the EzUHF RX, with the software that comes with it. I set it to channel 6 & 7These values are not voltages…"
I have an EzUHF receiver which has a RSSI needle and a Link Quality needle.You can assign these needles to particular channels on the EzUHF RX, with the software that comes with it. I set it to channel 6 & 7These values are not voltages…"
"Ah de mannen van Diest hebben ook APM :-)"
.jpg?width=584&profile=RESIZE_584x)
"Dit you see the Durafly Zephyr V-70 from Hobbyking ? I wonder where they did get there inspiration."
"I covered mine with corbon vinyl:
Now I'm busy fitting it all in APM1 and FPV.
"
Now I'm busy fitting it all in APM1 and FPV.
"
"Boutrate is max: 115200 (most of the time)
Here is my apm_config.h
// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
// This file is just a placeholder for your configuration file. If you wish to change any of the setup…"
Here is my apm_config.h
// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
// This file is just a placeholder for your configuration file. If you wish to change any of the setup…"
"Also the skybar is moving very slow and the timer stops from time to time."
"Ok, I got this to work.
But my numbers and symbols on the screen are flickering wild and disappearing. I see this a little on the video's above, but here it's really extreme.
Could it have to do that I used the 2.1 firmware in stead of the 2.012 ?…"
But my numbers and symbols on the screen are flickering wild and disappearing. I see this a little on the video's above, but here it's really extreme.
Could it have to do that I used the 2.1 firmware in stead of the 2.012 ?…"
"Or maybe there is a layout of the PCB board, so I can have a look myself ?"
Yesterday I was experimenting with the Remzibi's OSD and my ardupilot Mega.Everything went fine, I was very happy with it. But then disaster strikes. I don't now exactly what I did wrong but it must be something serious because I fried my oilpan.As…
Yesterday I made a flight: Setup 2 waypoints: 2.3km from home and 300m in between. But airplane fly's 1.5 km towards waypoint 1, comes back to launch, fly's 1.5 km towards waypoint 2 and comes back to launch.Very strange, there's also a very strange…
"Very interesting.
Does the Remzibi takes the GPS input from the Ardupilot or does it still needs it's own GPS ?"
Does the Remzibi takes the GPS input from the Ardupilot or does it still needs it's own GPS ?"
