"He said he used BEC rated for 6S...
Anyway my own opinion is the same. BEC started to drop voltage, Pixhawk noticed it, started to BEEP BEEP BEEP, and after bigger voltage drop, pixhawk stopped working and quad felt from the sky."
Hi,My friend asked me if I can ask somebody here for help analysing his crash. We really appreciate even little help.It was his first flight with his new machine.His pre flight and flight procedure was as follows:1) He connected 3S battery.2)…
"Well I definitely want to purchase complete set! :)
Which BEC would you recommend me?
Normal or HYB?
I will probably use two BECs for redudancy... :)"
"Christian, you rock!
Is there any way I could preorder it? I want to support your work.
I think very strong alarm and Power Led are perfect.
Power LED should be external, so we could mount it on the frame... (maybe two LEDs so we could put one in…"
"Yeah and that's the problem! I need it to descend lower that 120metres.
According to Czech Laws is illegal to use RTL higher than 120 metres AGL... :("
"Well I understood that your GPS is not plug and play...
And I am afraid that I could screw up something.
But I can change my opinion! :)
I am studying it know and it doesn't seem so complicated after all..."
"Hi!
I need your recommendation...
I am currently building huge X8 octo. I want to buy possibly the best GPS I can get for Pixhawk...
I don't want to go with Zubax GNSS 2 because I don't want to screw up any settings...
On RcGroups they recommend me…"
Hi!According to Czech Republic laws drones has special restrictions for RTL.One really important restriction is that RTL can not be used higher than 120 metres AGL.When you fly drone above 120m and then you deploy RTL, drone should descent minimally…
"Well it is...
It will be X8 octo.
My setup is:
T-Motors U7 420kv
T-Motors 18x6,1 props
T-Motors FLAME 80A ESCs.
2x Parallel GensAce 16000mAh 6S = 6S 32000mAh
Pixhawk (maybe two Pixhawks for redundancy)..."
"Hi Christian!
Perfect! That's all I need to know.
I will use 2x 6S 16000mAh... I'd like to monitor both batteries separately. My octo could consume up to 400A.
Do you know if it is possible to connect two battery monitors to Pixhawk?