Two wings are ready for flying with APM 2.5. Below, some more pictures with different views:
Three Part 2M Flying Wing easy to assemble fins are also removable:
Top View with folding propeller and motor installed
Bottom View Bottom pod is composite
Composite Canopy
This is my new design composite 2m Delta Flying wing
I have converted RC transmitter into joy stick using 10$ game controller and checked it with quad it fly's quad good . problem with original game controller was throttle control . Also added 6 position switch for mode control but the switch modes give some error only stabilize and auto mode don't give error.
Attach please find few photos of conversion.
I made following modifications
wing span increased to 74 in
root cord 12inch
Tip cord 9inch
Tested with 2x8000mah Tenergy pack
got 1hr endurance
Di-hedral 4inch from wing tip
IT is very hard to turn from aileron will reduce the di-hedral to 2inch
Prop apc 1407E will test 1412E
Takeoff weight was 4000grams
Project date 2002-2006 Completed
Wing Span 12ft
Weight 60-80kg
Engines tested were : 342cc boxer, 500cc boxer, 298cc Wankel Rotary
Max speed achieved was 400kph level flight with 298cc Wankel rotary engine
Launcher also took lot of time to develop
Landing bally or parachute
Autopilot did with electro-mechanical gyro with gps and pressure sensor.
Above photo is of final version and videos are from early testing / developing versions.
Buraq -1
This was developed in year 2000
1. Wing span is 12ft
2. Engine range is 100-250cc ( 100 is bit under power)
Photo of biggest UAV i did.
