Gender
Male
About
Location
Victoria
Please tell us a bit about your UAV interest
Real Estate Inspection Mapping/Surveying
Hometown:
Geelong
Activity Feed
Looking for an Aero M case Or information on a Pelican case that will fit a T-tail mapping plane, fuse, wings and tail attached with rc controller, batteries, ground station accessories etc?
"Taranis flight mode setup
3dr radio telemetry issue"
3dr radio telemetry issue"
"Here is the video embedded"
Hi Guys, I've got thru the radio calibration issues in Mission Planner but channels are still reversed. I followed advise and setup the Taranis Plus model setup as AETR with Throttle on CH3, Ailerons on CH1 and Elevetor, no rudder on CH2.I've setup…
Trying to update the firmware today for Arduplane 3.5.0 and I get that message. Anyone else having problems updating today?
"I've made a bit of a video of where I'm at now with the servo setup doing wierd things."
"Thanks Craig, this got the radios calibrated. Now when I plug servos into the Pixhawk I get no reaction like when it's plugged into the RX.
I tried Martin's setup but nada."
I tried Martin's setup but nada."
"I made a couple of videos:
1. Initialization of the Pixhawk and bound X*R
2. Mission Planner HUD and GPS view and Radio Calibration page"
1. Initialization of the Pixhawk and bound X*R
2. Mission Planner HUD and GPS view and Radio Calibration page"
"Any further thoughts on the radio calibration? I'm stuck on this at the moment and can't move past."
"yup, that's how she's set up.
do I plug my servos into the RX or the pixhawk main out?"
do I plug my servos into the RX or the pixhawk main out?"
Hi everyone, I searched this problem and there were a few hits. I've successfully calibrated the acceleration and compass but get blank bars when doing the Radio Calibration. The radio is bound to the RX and all servos work. I got HUD and GPS lock…
"I'm an American Expat certified in Australia, any chance of moving back to the USA and have my Australian certifications and experience translate over to the US system?"
"Update: I've gone with 2 rigs, the Go Discover as a practice FPV running a Pixhawk clone and the new Black Version X8,
I've also decided to build a X6 portable mapper running Pixhawk. Where is the parts list for a DIY rig?
Also, will the Hero 4…"
I've also decided to build a X6 portable mapper running Pixhawk. Where is the parts list for a DIY rig?
Also, will the Hero 4…"
