Gender
Male
About
Location
QLD
About Me:
New to uav's rc pilot for many years.
Please tell us a bit about your UAV interest
new to uav's Rc pilot
Hometown:
Maryborough
Activity Feed
"Have been using this wireless adapter with Phoenix for years and works very well
https://hobbyking.com/en_us/wireless-9-in1-simulator-adapter.html"
https://hobbyking.com/en_us/wireless-9-in1-simulator-adapter.html"
Would this air speed sensor be able to be used with pixhawkhttps://hobbyking.com/en_us/catalog/product/view/id/62445/s/frsky-ass-70-airspeed-sensor-w-smart-port?utm_campaign=EDM170118.AU&utm_content=5799480696&utm_medium=email&utm_source=EDM
"Got it working in windows xp by doing this
Copy ..\opencv\build\python\x86\2.7\cv2.pyd
Paste it in C:\Python27\Lib\site-packages
Open Python IDLE and type
>>> import cv2"
Copy ..\opencv\build\python\x86\2.7\cv2.pyd
Paste it in C:\Python27\Lib\site-packages
Open Python IDLE and type
>>> import cv2"
"Have got it to work under windows 7 but not under windows xp ,this is what I get in windows xp."
"dll issues in windows xp?"
"can not seem to get working on windows xp system have all installed and followed video a window pops open upon running then immediately closes"
"In the radio calibration page throttle goes from 992 at low to 2018 at full throttle"
I have changed from a kk2 board to the ardupilot with the latest firmware done al the calibrations but do not have enough power to get off the ground The quad had plenty of power when using the kk2 board . checked the settings in stranded parameters…
"want to simulate a mission in xplane with a helicopter instead of using a plane is it possible?"
Is it possible to run a simulation in xplane with the simheli firmware.I have run the planesim firmware in xplane no problem, just wondering about running the helisim in xplane10The wiki only mentions using aerosim..
"have also tried to change to pos hold in the actions tab in mission planner same result (unknown)? All other modes work fine"
