Gender
Male
About
Location
Aucklan
About Me:
not to much
Please tell us a bit about your UAV interest
just flying saround
Activity Feed
"You can use any SIM900 development board instead you can pick them up on ebay for around $50."
"Have you tried this script? I am using it with a Canon S100 for aerial mapping. I used it in its default setting and it works really well for what I need, a lot better than in the Canon auto mode. But I don't think I will be fast enough for what you…"
"No i didn't use the speaker and button but i just tried it and it made no difference. I pressed it as well a few times with no difference.
Danny"
Danny"
I just recently got the pixhawk, i plugged it into the computer and the device drivers installed fine i then went to mission planner to try upload Arduplane to it. A dialog box appeared to unplug then replug it back in i did this and then says…
"Thanks got it sorted"
Hi thereI have upgraded to the latest mission planner and found that when i fly my plane in auto after the last waypoint it will always go to 100m and circle home. I have changed the default altitude from 100m to 200m and it will still go to 100m on…
I have been using the Ardupilot for a while now with Xbees 2.4ghz 60mw and the other day i flew out to 1.7km and the rssi was at 70 - 80% and then i fly the same route tonight and the telemetry pretty much drops out at 1.5km. I haven't touch the…
"I had a problem like that and it was from vibration from the motor. "
Hi thereAfter having quite a few successful flights with the Ardupilot i decided to go a bit further away. When the plane got the first waypoint (i had lost the telemetry link) it nose dived straight into the ground but some how it corrected itself…
"I had another flight with mixed results.
On the first flight it went to the 1st way point and then the yellow line locked on to the next but then it started doing the circles thing again.
So i reloaded the mission and then when i put it into auto…"
On the first flight it went to the 1st way point and then the yellow line locked on to the next but then it started doing the circles thing again.
So i reloaded the mission and then when i put it into auto…"
"I downloaded the bixler para but when i flew it. It kept going round in circles.
So i made my own one and it works fine in stabilize mode
And it nose dived briefly and then i put it into manual and corrected it.
And i made sure i pressed restart…"
So i made my own one and it works fine in stabilize mode
And it nose dived briefly and then i put it into manual and corrected it.
And i made sure i pressed restart…"
"I just thought it was strange because it works the first time then when i reload the same mission it starts circling.
My plane its the bixler and it is APM 1
I made the course short because i am surrounded in forest.
I will get the param list when…"
My plane its the bixler and it is APM 1
I made the course short because i am surrounded in forest.
I will get the param list when…"
hi there I have had the APM for a few weeks now and and i am trying out the auto function.It follows the mission course fine the first time.Then i try to load a different course and write it to the APM, then i switch it into Auto mode in the air and…
