Hi guys..I've done a short program for transmission of a certain character.if (Serial.available() > 0) { incomingByte = Serial.read(); if ( incomingByte == 49 ) // 49 is ASCII for 1 { …
Is it possible to toggle from manual mode to stabilize mode without the usage of a RC? I am thinking of using Microsoft Visual studio to do the job. Modifying the program so that example F1 is pressed, the plane will toggle from manual mode to…
"How do i modify the "while ( incomingByte == 97 && Serial.available () == 0)" so that if a is press, it turn 45degree, when i release, it goes back to 0degree instead of staying at 45.."
i am using this short program..Servo myservo; int pos = 0; void setup() { myservo.attach(9);}void loop() { incomingByte = Serial.read(); while ( incomingByte == 97 && Serial.available () == 0) //left aileron { …
Hey guys, is it possible to upload program wirelessly with XBEE? If yes, how do I do the connection?Because I wish to do an enhancement of my project. I've been tracking each color pin of the FTDI but I could not really understand how to do this, if…
I am currently using the Ardupilot 2_7 program and currently trying to read the ground_course value for my bearing indicator.Some questions:are the values accurate?is the value measured by the GPS? if yes for the above question, someone teacher me…
"Hey, can i ask you that how fast are u receiving your course data? means how fast is it refreshing? I am using the latest 2_7 program and the data is refreshing rather slowly.."
Hi all! (:I currently able to test the XY and Z sensor accurately outdoor.I am currently testing the sensors using This is how I mount the sensors together with the AP on this piece of foam.And to get accurate values with accurate degrees of tilt,I…
"Can i ask what GPS hardware are you using?
As you said your heading is working? Do you mean that it works exactly like a compass?
Because I am using a GPS EM-406 and I am unsure how to read my current heading in degrees.
If the heading is referring…"
"I am using the same air gauges for my project and i need to get the values of the altitude and heading indicator properly. and i realised that the altitude provided by the EM406 gps module is not the one we need.
and from the CRS and BER values, how…"