Gender
Male
About
Location
Norristown, PA
Please tell us a bit about your UAV interest
Quadcopters
Activity Feed
"Tim, I was wondering the same thing. The website has been saying that it "will be released in a couple of weeks" for the past two months. "
"Para,
I am working with a similar airframe with low Kv motors and large props. I am also having problems tuning and I was wondering if you have tried out Jason's recommended PIDs? I have only lowered Rate_P; it seemed like the performance was…"
I am working with a similar airframe with low Kv motors and large props. I am also having problems tuning and I was wondering if you have tried out Jason's recommended PIDs? I have only lowered Rate_P; it seemed like the performance was…"
"Hi,
I am getting some mixed results with OF_loiter. It has been really overcast when I have flown, but the surface quality has been well above 20 (60 - 100 range). Today I had a couple of rock solid OF_loiters, but most of the time, my arducopter…"
I am getting some mixed results with OF_loiter. It has been really overcast when I have flown, but the surface quality has been well above 20 (60 - 100 range). Today I had a couple of rock solid OF_loiters, but most of the time, my arducopter…"
"Jason, thanks for all the good info, I think I will have to replace the motor.
Doug, the damage was not as obvious on my motor. All wires were connected, the broken wires are only noticeable when I took the motor apart. "
Doug, the damage was not as obvious on my motor. All wires were connected, the broken wires are only noticeable when I took the motor apart. "
Hi all, it's my first post as an Arduopter owner! I just got my 3DR-C in the mail this past week and I have been really impressed with the design and quality of the product. I'm running APM 2.0 with 850 motors. I am completely new to Ardupilot,…
"P.S. I was probably told about 20 times this summer that I could sign up to be emailed when the 3DR and arms came back in stock so that I wouldn’t have to check the website all the time. Good thing I checked the website anyway a couple of weeks…"
"I really sympathize with Alex on this one. I love 3DR’s products, but the lack of communication is very frustrating. I ordered my APM 2.0 on July 22, but I was unable to order a 3DR-B because it was out of stock. I got my APM 2.0 the next week in…"
"I'm just curious, but I only see one type of replacement arm available in the store. It looks like these are the new shorter ones? If so, will the older arms still be available? If we need a replacement arm for a 3DR-B quad, do we have to buy a…"
"Thanks for the help Mike, I just found the page too. I'm definitely saving copies of the pdfs while we still have access to them. "
"Through a google search I found the old product page for the APM 2.0 kit, not assembled. From the sounds of things, you shouldn't order anything from this page, but it does have the pin assembly guide and power protection kit setup instructions…"
"I just got my unassembled APM 2.0 kit in the mail today, but I cannot find the assembly guide anywhere. The card that came with kit said to go to http://tinyurl.com/APM2-0-setup, but I can only find the APM 1 assembly guide there. Previously the…"
"Hey, is the APM 2.0 assembly guide posted anywhere? I think it was previously posted to the product webpage, but I cannot find it now. My not assembled APM 2.0 is due to arrive in the mail tomorrow. I thought I would at least have a chance to…"
