Gender
Male
About
Location
Bandung, West Java
About Me:
Students of Aircraft Design, ITB.
Please tell us a bit about your UAV interest
www.pongkalem.co.nr
Hometown:
Bandung
Activity Feed
"Aero Hawk,
Great, finally you've made it.. can you please share the final mission commands?
Aero Hawk said:
Found the fix! turns out delay and condition delay don't do the same thing."
Great, finally you've made it.. can you please share the final mission commands?
Aero Hawk said:
Found the fix! turns out delay and condition delay don't do the same thing."
"Hi BrettI tested your testing code (ground) several times, but the shutter servo did not response. I used the exact same mission code as you use, with my own coordinates, nothing happen when im inside the loiter coordinates.
Do you have any idea…"
Do you have any idea…"
"Hi RitchieNow i know why i got stuck, the APM confused about void setup.
How about your wp_activity.pde code? Did you built it in order to embed with APM?
Im interested in autotriggering camera at waypoints, i have done some research for doing some…"
How about your wp_activity.pde code? Did you built it in order to embed with APM?
Im interested in autotriggering camera at waypoints, i have done some research for doing some…"
"Hi Ritchie
Thanks for sharing your ideas
Ive been looking for a simple way to triggering camera with APM. I've tested you code (wp_activity.pde & arducam.pde) on the APM, but ive got an error message about redefinition void setup when i compiled…"
Thanks for sharing your ideas
Ive been looking for a simple way to triggering camera with APM. I've tested you code (wp_activity.pde & arducam.pde) on the APM, but ive got an error message about redefinition void setup when i compiled…"
"Thanks mike, finally i found the solution for my problems.Connected my computer on somewhere else which is not behind proxy connection, then i cached the map that need. :D
In the latest version of your ardusim which is included in ardumega…"
In the latest version of your ardusim which is included in ardumega…"
"Hey michael, in the latest version of your ardusim which is included in ardumega planner, are you removed the google earth and instrument features? or maybe it just didnt shown up on my computer?
I already succed simulate the ardumega with xplane…"
I already succed simulate the ardumega with xplane…"
"Thanks for the respond michael,
So, there is no way that im using planner with proxy auth then.
Do you think it is possible to cache the google map data so we can use it offline?
I did some research about that, but i still cannot find how to do…"
So, there is no way that im using planner with proxy auth then.
Do you think it is possible to cache the google map data so we can use it offline?
I did some research about that, but i still cannot find how to do…"
"Thanks for the software,
I have a little problem, how can we set up a internet proxy server with authentication for the program?
Thanks."
I have a little problem, how can we set up a internet proxy server with authentication for the program?
Thanks."
"HI Chris
These are the photos about my ardupilot and ardushield board
All the connection, wiring and soldering are based on ArduPilot 2.x manual (http://docs.google.com/View?id=ddjmqgw3_43gm6gvggf)
I removed the power solder jump because I wanted…"
These are the photos about my ardupilot and ardushield board
All the connection, wiring and soldering are based on ArduPilot 2.x manual (http://docs.google.com/View?id=ddjmqgw3_43gm6gvggf)
I removed the power solder jump because I wanted…"
"Hi Chris,
this is my airframe setting file.
camar.h
i've already test the gps without the shield but using the same airframe setting and code with before (with shield). the result is just the same, my gps led (red) always turning on.
Hi…"
this is my airframe setting file.
camar.h
i've already test the gps without the shield but using the same airframe setting and code with before (with shield). the result is just the same, my gps led (red) always turning on.
Hi…"
"Chris,
I tried to modified the airframe settings and the code, but it still won't work.
Can you help me with the airframe setting and the code? Can you share me the code for this kind of test?
Thanks
Reegards,
Feri."
I tried to modified the airframe settings and the code, but it still won't work.
Can you help me with the airframe setting and the code? Can you share me the code for this kind of test?
Thanks
Reegards,
Feri."
"Chris,
I already tried your recommendation, but the result is just the same...
Do i have to change the airframe setting before i connect the GPS direct in to ardupilot board? Or do i have to use the special code for that?
Thanks
Regards
Feri"
I already tried your recommendation, but the result is just the same...
Do i have to change the airframe setting before i connect the GPS direct in to ardupilot board? Or do i have to use the special code for that?
Thanks
Regards
Feri"
"Dale,
I really appreciate your information, very helpfull.
But for now i thinks the problems is in hardware, because i already tried the same procedure on top of the 6 floors of my lab, i still can't get the GPS locked status.
Thank you very…"
I really appreciate your information, very helpfull.
But for now i thinks the problems is in hardware, because i already tried the same procedure on top of the 6 floors of my lab, i still can't get the GPS locked status.
Thank you very…"
"Hi Chris,
For a couple days, I've done what you've recommend for me.
But it's just the same, i still can't get the GPS lock status and the GPS Red Led still turning on and flashing.
But when I checked the board, i found something that's make me…"
For a couple days, I've done what you've recommend for me.
But it's just the same, i still can't get the GPS lock status and the GPS Red Led still turning on and flashing.
But when I checked the board, i found something that's make me…"
"Thanks for your reply.
I already set the GPS mode on configuration file. Since i'm using the EM406, based on manual, i have to set the GPS protocol in to SIRF (1=SIRF)
//1-7
#define GPS_PROTOCOL 1 // 0 = NMEA, 1=SIRF, 2=uBlox, Choose protocol…"
I already set the GPS mode on configuration file. Since i'm using the EM406, based on manual, i have to set the GPS protocol in to SIRF (1=SIRF)
//1-7
#define GPS_PROTOCOL 1 // 0 = NMEA, 1=SIRF, 2=uBlox, Choose protocol…"
"Hi Chris
I have some problems with my ardupilot, i already posted on arduino debugging tips page.
I'm confused about where should i post problems about my ardupilot.
i'm really thankfull that you have this kind of "debugging or troubleshooting"…"
I have some problems with my ardupilot, i already posted on arduino debugging tips page.
I'm confused about where should i post problems about my ardupilot.
i'm really thankfull that you have this kind of "debugging or troubleshooting"…"
