I like flying over the water and that side. Tis difficult to see if people are flying there as you drive by too. fri morn or W/E is when most fly there. do go - you shall enjoy. I've been distracted with other things of late so probably…"
"hi JB, I'm into that sort of thing. Well really just getting up to speed with APM2 board and the quad copter. manual flies well. Now waiting for no wind before testing auto flight (maybe this weds or thurs). Got gopro 1 on board and looking at other…"
"that's a great laugh sky
here in aus people regard cats in a very dichotmous manner - loved pet for some, destroyer of all wild life for others
i'm in the latter and why I LOL
Brett"
"@R_Levfebre
Was not obvious to me for a newbey in MP - low PWM for low throttle ? it's in the setup notes but not obvious for an essential step that if ommitted causes major drama - IMHO. probably would be best as a step in itself to test throttle…"
"@monroe
all TGY 9x"s? I guess so. Jason's comment above that most ship the 'wrong' way arund means others are likely to have problems. If a person copies an existing model setup in Tx they won't see the problem. Make a new model and whamo you are…"
SOLVED!!!can you believe it?after 8 long weeks, one return to 3dr and many attempts at solving I HAVE FLOWN. Solution - was to reverse the throttle on the Turnigy TGY 9x tx AT the transmitter, NOT in Mission Planner(I hate reversing throttle in any…
"SOLVED!!!
can you believe it?
after 8 long weeks and many attempts at solving I HAVE FLOWN.
Solution - was to reverse the throttle on thTurnigy TGY 9x tx transmitter, not reverse in Mission Planner
(I hate reversing throttle in any place - so…"
"SOLVED!!!
can you believe it?
after 8 long weeks and many attempts at solving I HAVE FLOWN.
Solution - was to reverse the throttle on thTurnigy TGY 9x tx transmitter, not reverse in Mission Planner
(I hate reversing throttle in any place - so…"
"@John centenary ave reserve is great though a little hard to predict the winds coming up the river
@james: Can you a road to go down for ascot waters pls. I am confused."
"@John
probs when connected to usb. I now have limited and sporadic success with calibration, though convoluted procedure of rx cable pulling and reinserting.
@ Randy and R_Lefebvre
A Turnigy 9x tx and two turnigy 9 rx's tried - about 2 yrs and 1 yr…"
" I can now proceed thru setup by taking 4 of 6 rx cables out before initiating radio calibration and inserting them back live to get all channels calibrated. weird hey.
response from another thread of mine suggest it is more of a firmware issue of…"
i have had a dickens of a time getting past the radio calibration step. currently i do something convaluted just to get calibration. Have you had success with rx and tx from turnigy 9x? thanks!