Gender
Male
About
Location
Morro Bay, CA
Please tell us a bit about your UAV interest
New 3DR IRIS|+ Have older Phantom 1
Hometown:
Morro Bay
Activity Feed
I took my Iris+ out to test its limits. Running it on altitude hold, I took it straight out to a small town in the distance. I stopped about 1600 feet from the town, all still looked good, still had video 90 percent of the time then I hit the…
"Randy,
Yes I did but I didn't know about the WPNAV_RADIUS was involved. I just tested it about 10 meters away and it just landed. I will try it at a larger distance.
I flew IRIS with the telemetry switch and have some odd results. The OSD works…"
Yes I did but I didn't know about the WPNAV_RADIUS was involved. I just tested it about 10 meters away and it just landed. I will try it at a larger distance.
I flew IRIS with the telemetry switch and have some odd results. The OSD works…"
"Thanks for the reply Randy, If I may ask a question or two?
It is working fine now with the switch, I am very happy with that.
I would like IRIS to RTL when transmitter signal is lost but when I turn the radio off it just lands. I have checked all…"
It is working fine now with the switch, I am very happy with that.
I would like IRIS to RTL when transmitter signal is lost but when I turn the radio off it just lands. I have checked all…"
I have only had the IRIS+ for a few months but I thought I would share my modifications. I like to try to find the least expensive ways to do things.First I used the Wilkera G2 gimbal for $75.00.with the Ilook+ camera for $150. since it has the 5.8…
"I managed to get my time working for my Iris transmitter.
1 )Press and hold menu
2) Use the up/down to select 3D Iris if not already selected.
3) Press the right > button for SETUP
4) Press the down arrow several time to the Timer 2 OFF and press…"
1 )Press and hold menu
2) Use the up/down to select 3D Iris if not already selected.
3) Press the right > button for SETUP
4) Press the down arrow several time to the Timer 2 OFF and press…"
I put my Phantom 1 F40 camera on my new IRIS+ and used a servo to tilt the camera. It works great but one problem I have is getting enough pitch change to keep the camera stabilized. It needs to apply more tilt when the quad is tilted when moving…
