Hello,
I have got a Pixhawk Flight controller board. All I am looking further is to use simulation with Pixhawk. I no nothing about Gazebo or any other simulation.
I want to learn simulation with Pixhawk. Can anyone help me out with where to start from
Hello,
Please check the attached image.
This is what I found when I was looking for the Pixhawk to X8R Receiver Connection.
Please describe the requirement of this cable against the ordinary telemetry that we connect.
Is this compulsory to be connect
Hello,
Looking for an Obstacle avoidance sensor that is compatible with Pixhawk and/or Ardupilot.
Within the price range of 10,000 Indian Rupees.
Description of set-up with Pixhawk is also needed.
Please help.
Thanks
Read more…Hello,
I have a Parrot Sequoia sensor which was working fine until yesterday. The sunshine sensor, which was glowing some or the other light, has stopped working. It is not showing any light over it. It was working until yesterday. There have been no
Hello, I am new to Pixhawk RTK and would like to know how effective it is.
I have used the Phantom RTK. So, I am looking for someone who has experience of both Phantom RTK and Pixhawk RTK, based on that the comparison of Pixhawk accuracy can be done.
Read more…I was working on my UAV Swarm and this thing has come up in my mind.
WHAT HAPPENS TO THE OTHER DRONES WHEN THE LEADER/MASTER DRONE LOSES ITS CONTROL AND/OR FAILS?
Does the MASTER/LEADER tag goes to the 2nd Drone or it chooses randomly or this doesn't h
Read more…Hello all,
Looking forward to purchase an autopilot or Flight Controller Board that can go for a fully Autonomous mission. So, what I feel it should support is, Auto Takeoff and Landing, Altitude hold, Hover at a desired altitude and distance, loiter.
Read more…Hello,
I am working on a tail wheel fixed wing drone with Pixhawk Autopilot system.
Every time I turn it ON, the aircraft creates some error in leveling the control surfaces. Mostly it happens with the Elevator. So, when I turn it ON, the aircraft el
Hello,
I am using a fixed wing plane with a pixhawk autopilot system. After all the setup done, I was checking the Flight Mode operation. When I turned to Auto Mode, it is switching to RTL mode.
I think it is due to Failsafe or any other related safe
Hello,
I was working on my Delta drone yesterday. Connected a Pixhawk Cube to it.
I was just testing the operation of the control surfaces. For that, I turned the AUTO Mode ON. Checked the Elevons, working fine. Both, Elevator and Ailerons. This is w
Hello,
I am looking for an IP camera or some other camera that can be programmed and used with Raspberry Pi. I want to use it for some application. This application requires a good quality output.
I have this important question too. I feel that FPV Cam
Read more…Hello,
This has just come in my mind that, if I have a quadcopter flying with a pixhawk cube on it and my home location is in sea, constantly, slowly moving in some direction.
Now, can I make that moving vehicle as a home location. Will my copter la
Read more…Hello,
I am using Pixhawk 4.2.8 Autopilot with Mission planner software. I tried to do the battery calibration as per the documents information. But it is not working for me.
Vehicle specification
Vehicle - Fixed wing UAV
Battery - 3s 2700mAh
Software -
Read more…Hello,
I am using Pixhawk 4.2.8 for my arduplane. I am using mission planner software. I just checked on how to check the data logs on maps. I got a way to check it on Google Earth. Now, what happens is, I loaded the kmz or kml file/ double clicked t
Read more…I want to do something hands on with my arduino uno board. But, I do not have any other components and equipments with me right now except arduino uno board, arduino software, etc. I want to do something that is related to autopilot functions. Is it
Read more…