Gender
Male
About
Location
Saint-Petersburg
Please tell us a bit about your UAV interest
I use different kinds of UAV in perpous of land surveying
Hometown:
Saint-Petersburg
Activity Feed
Hello everybody!- At the moment I m biulding UAV that I want to fly with no RC at all? but how to get rid of warning NO RC RECIVER on flight screen?- I use arduplane for many years and always have problems with compas, can I just turn it off, I am…
"This is the wireing diagram of plane setup. Just incase...IMG_5915.JPG"
"Hello! Did a test today. with Lidar disconected. Plane shuted the motor again, I swithed to FBWA, gained some altitude then switch to AUTO, plane flew for a bit and then shuted motor again so I had to swith to FBWA in then land it. So I guess this…"
"Hello! Did a test today. with Lidar disconected. Plane shuted the motor again, I swithed to FBWA, gained some altitude then switch to AUTO, plane flew for a bit and then shuted motor again so I had to swith to FBWA in then land it. So I guess this…"
"Hello! Did a test today. with Lidar disconected. Plane shuted the motor again, I swithed to FBWA, gained some altitude then switch to AUTO, plane flew for a bit and then shuted motor again so I had to swith to FBWA in then land it. So I guess this…"
"Could it be static? When there is enough static electricity accumulated ports go crazy? And when I change it to different port there is no static and everything work well till static accumulates on that port again?"
"Could it be static? When there is enough static electricity accumulated ports go crazy? And when I change it to different port there is no static and everything work well till static accumulates on that port again?"
"Good idea about connecting servo in paralell!!! Did that but cant reproduce failure on the ground, its not that cold any more its around 0C - +5C. I think its some how related to temp. Have to wait for catapulte to arrive before I will do air test.…"
"I will attach log for the video above.
Could it be some kind of noise that makes ESC go crazy?_47.BIN_48.BIN"
Could it be some kind of noise that makes ESC go crazy?_47.BIN_48.BIN"
"Thank you for help Bill! I was blaming ESC as well until this https://youtu.be/HMyRHtuzHXk. This video was shot in the office after the last flight(log 46). In the video you can see that motor started spining by it self straight after I turned the…"
"I ve uploaded logs. Thanks!
PS Plane didnt crash, it s succseflully landed with motor off:)"
PS Plane didnt crash, it s succseflully landed with motor off:)"
"Here are two logs
37 - crash while mission https://www.dropbox.com/s/rlxbydxm1mogvqp/37.rar?dl=0
46 - crash while testing https://www.dropbox.com/s/f97o3x6g1uggvb0/46.rar?dl=0"
37 - crash while mission https://www.dropbox.com/s/rlxbydxm1mogvqp/37.rar?dl=0
46 - crash while testing https://www.dropbox.com/s/f97o3x6g1uggvb0/46.rar?dl=0"
"Yes. but it quite big. I cant upload it here.... Mabey I send a link here to storage where I ll load it up?"
"I use Castle talon 90A. I thought it could be thermal shutdown but then why did it go crazy on video when I turnd it on in the room?"
"Yes! I have connected throttle to all "damaged" ports to check them again and they were just fine(on the groung). But before, as soon as I turnd the plane on, with throttle connected to port 3, motor starts spining even without ARMING and pressing…"
"Its original Pixhawk that I got from 3DR store..."
