Gender
Male
About
Please tell us a bit about your UAV interest
efly.co.il
Activity Feed
"BiCopter center of gravity.
I saw a code came out for Bicopter.
How far can the center of gravity of the BiCpter VTOL QuadPlane motors line can be?"
I saw a code came out for Bicopter.
How far can the center of gravity of the BiCpter VTOL QuadPlane motors line can be?"
"Any one?"
Do the Arduplane SW support a differencial thrust for atwin motor plane?I like to connect the motors to 2 separate channels and use the motors to coordinate turns.
"Hi
Do you have a link for the "LIDAR Lite"?
Where can i buy one?"
Do you have a link for the "LIDAR Lite"?
Where can i buy one?"
"Dear Grant
Sorry for the delay responding *** thank you! ****
Do you know, or anyone else if I can use a simulator steering wheel?
Something like "Microsoft Xbox Steering Wheel"
Thanks
Itzik"
Sorry for the delay responding *** thank you! ****
Do you know, or anyone else if I can use a simulator steering wheel?
Something like "Microsoft Xbox Steering Wheel"
Thanks
Itzik"
HiI like to control my rover (Pixhawk) using 3DR telemetry with the ground station. Can I use a joystick or gamepad on PC? I like to do it without or in parallel to Radio Controller, how do I set it up?Can I configure it on the mission planner?There…
"Thanks, I'll look for the files.
Any idea what is the best map source? There is any different anyway?"
Any idea what is the best map source? There is any different anyway?"
I have 3 questions:What is the recommended map source for prefetching, Google sat? Open Street maps? There is a very long list.There is a connection between zoom level and flying level?After fetching, can I copy the data to a deferent computer?…
HiAfter the "radio calibration" procedure is done I'm getting the message that channel 2,4,5 or 1.6.7…. "Failed to set channel x". Every calibration the error is in deferent channels. Only one time I didn’t get any error.However, the channel PWM…
"Any idea?
Last calibration attempt, I got "Failed to set channel 2".
The PWM parameters for channel 2 look OK, but servo #2 was jumpy today."
Last calibration attempt, I got "Failed to set channel 2".
The PWM parameters for channel 2 look OK, but servo #2 was jumpy today."
HiAfter the "radio calibration" procedure is done I'm getting the message that channel 2,4,5 or 1.6.7…. "Failed to set channel x". Every calibration the error is in deferent channels. Only one time I didn’t get any error.However, the channel PWM…
"Hi Randy,
I’ll not describe the all Via the La Rosa; I’ll jump almost to the end:
I didn’t get the Loiter and RTL to work, so I load the parameters from a friend with identical setup.
The quad was Loitering and coming home. It was the last minute of…"
I’ll not describe the all Via the La Rosa; I’ll jump almost to the end:
I didn’t get the Loiter and RTL to work, so I load the parameters from a friend with identical setup.
The quad was Loitering and coming home. It was the last minute of…"
"Thanks for helping, all works good (90%). Stab, Alt-hold and Loiter.
RTL is not working, the quad is holding the position but not moving to home position. Any idea what to check?
Thanks
Itzik"
RTL is not working, the quad is holding the position but not moving to home position. Any idea what to check?
Thanks
Itzik"
"Hi
Thanks for all the info, its help me to solve the problems with my quad.
where can I download the Mission planner 1.2.53 mav 1.0?
where I define the fence radius. Is the radius is always from starting point?
Thanks
Itzik
"
Thanks for all the info, its help me to solve the problems with my quad.
where can I download the Mission planner 1.2.53 mav 1.0?
where I define the fence radius. Is the radius is always from starting point?
Thanks
Itzik
"
Hi,I have a new problem with the OSD, I can see all the OSD characters but it is frozen, no data changing, only the heartbeat symbol is blinking.Any ideas?
