About

Gender

Male


Location

Oakley, CA


Please tell us a bit about your UAV interest

X8 owner- just getting into multirotors


Hometown:

Oakley, CA


Activity Feed

Jake Barritt replied to Jake Barritt's discussion RTL/Loiter/Home Arrow not working
"Last shameless bump before I try.... not sure."
Apr 23, 2014
Jake Barritt commented on Trent at MyGeekShow's blog post MyGeekShow Raising Money on Indiegogo for Flight Across USA
"25 bucks added. Good luck to you guys!"
Apr 22, 2014
Jake Barritt replied to Jake Barritt's discussion RTL/Loiter/Home Arrow not working
"Bump for a suggestion..."
Apr 21, 2014
Jake Barritt posted a discussion
I have the APM 2.6 on my hex. I configured the OSD to show the return to home arrow but I can never get it to show up and my Loiter mode does not work- it banks and flies away once i trigger it. I get a solid GPS fix before I take off.  I have not…
Apr 17, 2014
Jake Barritt replied to Jake Barritt's discussion Can I power my output side of APM 2.6 using the JP jumper?
"I had thought you needed power there to power the ESC signal. Sounds like I was mistaken. Thanks!"
Mar 10, 2014
Jake Barritt replied to Jake Barritt's discussion Can I power my output side of APM 2.6 using the JP jumper?
"bump for an answer."
Mar 10, 2014
Jake Barritt posted a discussion
Hexacopter, all 6 esc's DO NOT have a BEC on them so I need to power the output side of the board. I am using the power module. So can I just use the JP jumper to power the output side, or do I need an external BEC to power it?I will not be using…
Mar 6, 2014
Jake Barritt posted a discussion
I was told that the wiki here (https://code.google.com/p/arducam-osd/wiki/Cfg_RSSI)  for configuring the RSSI output was not the way it needs to be done with my Dragonlink LRS. Can someone point me in the right direction as to how to set up the RSSI…
Jul 17, 2013
Jake Barritt replied to Jonathan M's discussion APM 2 GPS not getting a lock?
"I also was not able to get a GPS lock unless it was plugged into the UBS. I had my gps line ziptied next to my servo wires. I cut the ziptie and gave the gps line a little room and it solved my issue."
Apr 12, 2013