Gender
Male
About
Location
Indianapolis, IN
About Me:
I'm into building a new Tarot 680 Pro Frame
Please tell us a bit about your UAV interest
I enjoy flying Multicopters and new to the sport.
Hometown:
Indianapolis,Indiana
Activity Feed
What wires on a Lightware SF30B do I connect to the ADC plug on a Pixhawk ?The Lightware SF30B can only connected to the ADC plug on Pixhawk, not the serial port because of speed factor.Has Lightware gone out of business, their web page is not setup…
"Ravi, how do you do a onboard magnetic calibration?
Do you know of any Documentation on the subject?"
Do you know of any Documentation on the subject?"
"I assumed your talking 2.4 firmware, instead radio version number ?
kent Martin said:
Glen,
Please first ensure you have version 2.4 or later. There was a bug with ppm record on earlier versions.
If yours isn't let me know, and I can send you the…"
kent Martin said:
Glen,
Please first ensure you have version 2.4 or later. There was a bug with ppm record on earlier versions.
If yours isn't let me know, and I can send you the…"
"Could you please point out a model, make of radio you referring to, or url to one on Ebay, so I can get a ideal of one your talking about.
thanks for the info."
thanks for the info."
"Does anyone know of a Website that has the parameter list and what the meanings are ?"
"What is the Max Baud Rate on Pixhawk Serial 4/5 ports.
I want to setup a Range Finder and it can operate at 921600 baud."
I want to setup a Range Finder and it can operate at 921600 baud."
"I'm installing A Lightware SF30/B Sonar on my Pixhawk, will APM work OK ?"
Using Qgroundcontrol-2.9.4-72, how do you find the Firmware Version of the aircraft you are running ??
"Has anyone connected a Lightware SF30/B 50 meters Range Finder to a Pixhawk ?
This is instructions for connecting a Lightware SF10 .
http://copter.ardupilot.com/wiki/common-lightware-sf10-lidar/"
This is instructions for connecting a Lightware SF10 .
http://copter.ardupilot.com/wiki/common-lightware-sf10-lidar/"
Trying to update Firmware, Does the Drones battery need to plugged in to do Update of PX4 Stack Firmware ?I Installed the latest Qgroundcontrol and it keeps saying to be sure that SD card is plugged in , It is plugged in and it is the original SD…
"Version Pixhawk software to install.
I understand that they have a upgrade of software that take care of "Range Finders" and other bugs.
Is there a stable or beta version that takes care these problems ?
And what Version is it ?"
I understand that they have a upgrade of software that take care of "Range Finders" and other bugs.
Is there a stable or beta version that takes care these problems ?
And what Version is it ?"
"Initial setup Setup of Pixhawk.
Does Battery need to be plugin to make Pixhawk Initial settings ?"
Does Battery need to be plugin to make Pixhawk Initial settings ?"
"BIG QUESTION ??
I have a Tarot 680 Pro Hexicopter with Pixhawk fight Controller, with;
6 Sunnysky 4108S motors
6 14.5" carbon fiber props
6 lbs 20,000mah 6S Lipo battery
The overall weight of muliticopter is 14 lbs.
The BIG QUESTION is;
Will this…"
I have a Tarot 680 Pro Hexicopter with Pixhawk fight Controller, with;
6 Sunnysky 4108S motors
6 14.5" carbon fiber props
6 lbs 20,000mah 6S Lipo battery
The overall weight of muliticopter is 14 lbs.
The BIG QUESTION is;
Will this…"
"Pixhawk Parts and Cables for the Pixhawk, can be found at http://www.helibatics.com/
They are here in the USA, Texas , David who owns Helibatics has a large inventory of Pixhawk parts. I buy all my parts from him."
They are here in the USA, Texas , David who owns Helibatics has a large inventory of Pixhawk parts. I buy all my parts from him."
"Thanks for the responds Laser Developer.
What would be the settings for SF30/B on Pixhawk ?
On Arducopter website they say nothing about the SF30/B, just on the SF10
I'm very excited about flying the SF30/B on my 680 Pro Hexicopter and impress my…"
What would be the settings for SF30/B on Pixhawk ?
On Arducopter website they say nothing about the SF30/B, just on the SF10
I'm very excited about flying the SF30/B on my 680 Pro Hexicopter and impress my…"
