Thank you, as well as Henri for this circuit layout. I built it and hooked it up to a HackHD board camera which usually just needs to short two pins for under a second to start and stop. Tactile switch speed. This circuit passes some…"
You mentioned how you thought Henri's circuit (Attachments: Pixhawk relay driver-2.pdf, 14 KB) could be used as a simple switch. I agree with you, many cameras just need to short two pins.
Could you share a way to do this simply with a…"
"Hi Nicolas
Not a special camera. In this case, only and SD camera was used, at 60 fps. It's a tradeoff. Higher framerates hold on to the points better, (obviously) and higher physical resolution increases the resolution of the paths, but in many…"
"Yes, this is much better than when I used GeneralLift's Encodacam to fly Jeremy Renner over a forest. And that was amazing. In that case we shot him on Greenscreen in Berlin, but the camera was on a Technocrane with all axis encoded…"
"Thanks for this app Kevin. It is really solid and straight forward.
I am having trouble importing WP files into the system. Keep getting an incompatible format thing. It appears the wpt format is simply a re-extension of the Mavlink TXT waypoint…"
"Same here. 4-in-1 Esc calibration won't retain. While in calibration mode, and right after you lift the stick to test it, those motors roar. But power it down, and back up after 30 seconds, you lift the throttle a bit and the motors barely…"
We'd like to ask the community to seriously consider a new quadrotor platform, a new concept really. Ospheric.comAn Ultra-Light, inexpensive extended time aloft, quad-rotor Kit called Paper Drone. It's not all paper, but 50% of it is. The idea…