Gender
Male
About
Location
Barcelona
About Me:
Architect Aerospace vehicles engineer
Please tell us a bit about your UAV interest
3D printed 0% energy UAV
Hometown:
Santpedor
Activity Feed
Hi DIY DRONES friends,Because of the "man on the moon" 50TH anniversary I would like to share with you the 3d printed moon project. It is a 22 GB digital model from Nasa LRO data that can be any size 3d printed. I CAN HELP YOU IF YOU WANT TO START…
"Thank you friends, I'll test it with a real model because it is easier than compute the 2+order transitions of the movement. Project flight mechanics hypothesis has been: weak disturbances, none inertial forces were neglected and flying parameters…"
"Great Chris. I have nice computation in flight mechanics for the Albatros UAV. Look for annex IV:
https://drive.google.com/open?id=0By-z5jK3ynCiTTI4UUZtd1RHcWc&a..."
https://drive.google.com/open?id=0By-z5jK3ynCiTTI4UUZtd1RHcWc&a..."
https://www.youtube.com/watch?v=u6r0m5KM4m8In the Albatros UAV, a new design after Barcelona 3d printed UAV, I'll test a moving mass (batteries) control and an aeroelastic wing for the aileron surface. What do you think about that?
"The CFRP is added to the Aluminium tube by glue (resin). And Aluminium tubes are connected using the inductive heating into one of them, increasing diameter and connecting. Returning to the ambient temperture, tubes become fixed. If a detachable…"
"LearJet used this technology in the wings/fuse union"
Here you can see an interesting Al union for CFRP or composites joints. Al+CFRP glue. A-Al heat by solenoid.https://www.youtube.com/watch?v=yNel_wzbeAY
"Wingspan:1500mm
Fuselage span: 1135mm
PLA Reprap weight 845g all-up weight
ABS30 Stratasys not measured"
Fuselage span: 1135mm
PLA Reprap weight 845g all-up weight
ABS30 Stratasys not measured"
"It is the advantage of some expensive 3D printers"
https://www.youtube.com/watch?v=zwvQuhjKeUo130h 3D printing process has finished. Take a look at FORTUS400mc UAV apps performance!
"Barcelona 3D printed UAV google+ website has all photos and news. Take a look!"
"Amazing tool, Thank you Joshua!
I'll present CADDRONES with programmed G-codes of Barcelona 3D printed UAV with 845g weight performance in operation for Reprap 3D printer, the key of Barcelona 3D printed UAV.
Notice me when operative."
I'll present CADDRONES with programmed G-codes of Barcelona 3D printed UAV with 845g weight performance in operation for Reprap 3D printer, the key of Barcelona 3D printed UAV.
Notice me when operative."
"STL are available in thinginvers. If you want it in CADDRONES tell me and I'll uppload them."
COMHER, STRATASYS International distribution, is printing Barcelona 3D printed UAV.FORTUS 400mc is able to print this 15dm wingspan and 10dm fuse length in only 8 parts in the same print volume.Material ABS30Duration: 130hSee the printer in…
"I have used the maximum Z axis height of Reprap BCN 3d+ printer, 200mm.
For your problem, CAD file has been included in thinginvers. You can divide total parts by using boxes, union and substraction commands."
For your problem, CAD file has been included in thinginvers. You can divide total parts by using boxes, union and substraction commands."
