Gender
Male
About
Location
Langhus
About Me:
Newbie to DIY*
Please tell us a bit about your UAV interest
Just started
Hometown:
Oslo
Activity Feed
"I¨ve set up Pixhawk as a antenna tracker and use the ReadyMade RC¨s wooden tracker with two servos working great when testing with no power from the Pixhawk. I have a TGY Plush 30A ESC to power the servorail on the Pixhawk, but the servos barely…"
"Hi
I've now tried them all, and it only work when bypassing the video from the MinimOSD board. I'll buy a new one in a few days or so.
Thanks
Jorn"
I've now tried them all, and it only work when bypassing the video from the MinimOSD board. I'll buy a new one in a few days or so.
Thanks
Jorn"
"Hi all
I got it:-) and there's a good video here to:
https://www.youtube.com/watch?v=Pxg5PEccumY
Thanks
Jorn"
I got it:-) and there's a good video here to:
https://www.youtube.com/watch?v=Pxg5PEccumY
Thanks
Jorn"
"I'm using a MinimOSD with a Pixhawk. I had a picture w/o OSD for an hour this morning for a test.
When I unplugged the battery and plugged it back, the picture was also gone. I've been struggling for hours w/o coming any closer to a happy ending.…"
When I unplugged the battery and plugged it back, the picture was also gone. I've been struggling for hours w/o coming any closer to a happy ending.…"
I'm using a MinimOSD with a Pixhawk. I had a picture w/o OSD for an hour this morning for a test.When I unplugged the battery and plugged it back, the picture was also gone. I've been struggling for hours w/o coming any closer to a happy ending. If…
"Randy
Is it then going back to "normal" when released? It's a good thing speeding it up a little, but a few words in a dialog box before calibrating would be enough.
Thanks"
Is it then going back to "normal" when released? It's a good thing speeding it up a little, but a few words in a dialog box before calibrating would be enough.
Thanks"
"I just rolled back to AC3.1.5 and reinstalled MP the same way as over, and same thing happens. I think this is the way it sholud be. It seems like MP have some calibration data and just need to get the rest. I don't know."
" I've uninstalled MP, deleted all files in MP folder and reinstalled ver.1.3.10. Then i pushed the "Check for beta updates" button on the help screen and now the version is 1.3.11 1.1.5426.22786. If it's a beta version, i don't know as it doesn't…"
"When re-calibrating the compass after installing AC3.2 it stops after about 20 seconds and the lady says "calibration complete" and i see the calibration dialogs # for the two compasses. I tried to upgrade to MP 1.3.11 and the same thing happens. Am…"
"Randy
I saw this parameter for a week ago and checked my logs, and it was about the same value as i planned to set for THR_MID. I have quite overpowered motors(1,6kg thrustx6) so when looking at my Taranis when hovering in Stabilize mode it hovered…"
I saw this parameter for a week ago and checked my logs, and it was about the same value as i planned to set for THR_MID. I have quite overpowered motors(1,6kg thrustx6) so when looking at my Taranis when hovering in Stabilize mode it hovered…"
"I've just installed AC3.2, and as soon as it stops raining, i'll try it out. By the way, the TRIM_THROTTLE parameter is it ok to use it for THR_MID, if not why?"
"Downloaded now!"
"Nice work! "
"The 1.0.10 is working."
"Hi
I upgraded from Store last night and got a message like this "file is not properly signed" and the installation failed on both Samsung S2 and my new S3."
I upgraded from Store last night and got a message like this "file is not properly signed" and the installation failed on both Samsung S2 and my new S3."
