Location
Columbia, MO
About
Please tell us a bit about your UAV interest
Research and projects with drones and UAVs
Activity Feed
"yes, there were daily visits to sites. As someone who works for an organization that received a letter - i had visits in 2013 to my site from the FAA:
4/14/34/54/74/94/134/144/204/215/25/127/27/3 (a lot on this date)7/87/177/257/31amcproxy.faa.gov -…"
4/14/34/54/74/94/134/144/204/215/25/127/27/3 (a lot on this date)7/87/177/257/31amcproxy.faa.gov -…"
"Missouri have an anti-drone bill too in the works.. http://www.house.mo.gov/billtracking/bills131/biltxt/perf/HB0046P.htm"
"For me, whenever I try updating firmware using mission planner running inside a Windows 8 or XP virtual machine using VMware fusion, It fails - I find I have to go find a 'real' PC to get it to update."
"turns out the camera i was using was set to PAL, and this was confusing the OSD. Why it worked when using a separate battery, i know not..."
"Here's a rudimentary connection explanation and some further symptoms:
camera > core > minimOSD video in > VTX
If i disconnect the camera, then i get data appearing on the video feed - as soon as i plug the camera, the data disappears but i get the…"
camera > core > minimOSD video in > VTX
If i disconnect the camera, then i get data appearing on the video feed - as soon as i plug the camera, the data disappears but i get the…"
Hi,I have a TBS Discovery frame, and have recently added a TBS core to power the camera, TX and MinimOSD.I have the two solder blobs added to the MinimOSD, so i'm not powering via the APM port (the +5v from APM isn't even connected).When i power it…
Hi,tried on 1.2.27 and 1.2.28 on WinXP and Win8 running under VMWare Fusion.tried on 1.2.27 and 1.2.28 on Windows 7 physical machibne,I'm unable to download logs - each time i hit screens similar to the below - any…
"A project (http://dronelab.missouri.edu/projects/eon-underwater-remotely-opera...) that we did a few years ago was building a ROV - we used an ethernet cable (50') that was zip-tied to a lightweight steel cable. This allowed us to use ethernet…"
"Here's some photos from inside the NAZA GPS unit - it's interesting that the tops of the ICs (chips) have been "etched" to hide any markings..."
"I should have added... power cycling OSD doesn't resolve it, disconnecting telemetry data just gives the "waiting for heartbeat", and once connected, the data is either absent (or wrong).."
Hi,at initial APM/OSD/xbee power-on, the OSD gets some data from the telemetry but this isn't completely accurate. Once I "connect" the Mission Planner with an xbee on my laptop to the APM, the telemetry starts to display all the data (and…
