When the mode is set to FBW or STBL the ArduPilot give a counter correctionwhen I tilt my UAV by hand.While the motor is turned on and spinning (even on a very low RPM)the counter correction from the Ardupilot turns to be very minor.I don't think…
while trying to config the flight modes instead of changing modes with the AIL stickmy AIL are actually moving. I've set a 3 position switch and I can change modes in 2 positions out of 3my PWM (or whatever it called) number is set correctly, I've…
"Setup all together ?
It would be the best to follow the step by step guidance that you can find here which cover almost everything
that you need from build to setup and finally flying the quad : https://code.google.com/p/ardupilot-mega/wiki/Quick"
I don't know why,but at first I could see movements of the IMU on screen livewhile in CLI mode.I don't know why, but it just stoppedI can have Terminal interaction and PIDs updatesand even last known GPS coordinates while reading WPsBut I don't see…