"I am back i am also trying to pass the nmea data to apmplane 3.1 with no success. I have a novatel oemv2 l12 receiver. I configured the correct baud rate etc but no luck. I also enabled all the available nmea sentences through the great and very…"
Hello,I am planning to use a novatel oemv receiver as the GPS for my plane. I am using arduplane 2.78 and APM 2.5 I know that ardupilot is happy even with nmea. The question is which $gp... Sentences are enough to be activated in order to do the…
"very old post
however
can anybody define the nmea sentences that the arduplane needs to have from the gps receiver? i am going to use a ''4th party'' receiver (none of the above) and i have to configure the nmea output throught plenty of available…"
"@johr
you should install the u center to configure the receiver and you will test it from there. You may have data without fix. Check the antenna if you have active or passive one."
"i have the board now and it works pretty good. If anyone made the mod with the supercapacitor i d love to have at least a photo or a description of the mod or even the capacitor i should replace...
Thank you"