I have no Idea what the latest firmware version is loaded into my Arducopter by Mission Planner. Is it possible to show it somewhere in the APM Mission Planner? Not The Mission Planner version but the Arducopter firmware version.
Neil
Read more…I updated MP this morning and now Stabilize shows as Guided and Loiter shows as FBW-A. Is this an error?
Neil
Read more…I am having a hard time setting up my Xbee's. I follow the manual but only see version 1002 and 1061. The manual says it should be 1161. Which is correct?
Neil
Read more…Hey all,
I have a custom home made frame and noticed with my 2x 2100mah batterys, the CG is about 2.5" below the props. Am I right that the lower the cg is the lower the P will be due to the quad already wants to right itself? If this is so, addi
Read more…What are people doing to get google earth out in the field? I am thinking about getting the tether plan on my Iphone4 to be able to access internet and thus google earth in the field.
Neil
Read more…Heye all,
I was wondering if it is possible to add a remote reset button on the oilpan to make it easier to reset. My quad is custom and it is almost impossible to reach the reset switch. If it is possible, where do I solder the two wires for the r
Read more…Hi all,
After running the APM mission planner several times and manually entering declination in the cli, my compass works but only North is correct. As I rotate the quad by hand, East and West are off a bit, South is way off. My declination is 5.5
Read more…I have been trying to get the live video overlay to work and have a couple problems. I am running win7 home with a dell xps laptop. If I use the built in web cam, the mission planner will slooooow down so much it is unuseable. The video will work but
Read more…I have gone through the setup in the newest mission planner and using the diy magnetometer, newest ac2 code loaded through mission planner. Everything seems to work when I view flight data except heading, it is stuck at about 354deg. it will change w
Read more…Hey all, Does the Alpha RC1 code support X configuration? And if so, can someone expkslain how I go about doing it.
Thanks
Smitty
Read more…Just finished building my first quad. I custom built the frame with 1/8" ply, 3/4" square alum tube, and a glad ware container. It hovers very nice and smooth. BP18A ESC's, BP2217-9 motors, 10x4.7 props, 2x 3s1p 2100mah packs, custom power distributi
Read more…