About

Gender

Male


About Me:

I'm a senior MSc in Computer Science with lots of experience in software, firmware and hardware development. In my free time I build and fly RC helicopters and planes.


Please tell us a bit about your UAV interest

Got interested in what's possible now; building a QuadCopter using APM+oilpan shield


Activity Feed

Patrick L commented on Andrew Van Der Plaats's blog post Sky Sapience Delivers Pre-Production Hovermast to the IDF
"I have a shopping list at Vicor with an AC (110-230V) to HV DC (375V) PFC converter and an isolated HV/LV DC/DC converter at 600W. The latter weighs less than 300gr. This would allow to use light weight 2x 0.5mm2 cable and the power is enough for a…"
Sep 3, 2013
Patrick L commented on Jonathan Price's blog post HobbyKing Selling ArduPilot Parts
"At least the user comments at HK told me that there is a heat problem with MinimOSD V0.1 powered by 12V.
Yes, I found mine (acquired from 3DR) to be suspiciously warm, but otherwise I wouldn't have addressed the issue, with probably catastrophic…"
Dec 27, 2012
Patrick L commented on Gary McCray's blog post QuadroQuad - Quadcopter plus four horizontal motors / props = Stable Flight - I Hope!
"Gary,
Curiously, the wiki about contra-rotating propellors mentions improved efficiency and increased noise. In practice the sound is different but the noise level is certainly not excessive, and while I'm pretty sure that the bottom props operating…"
Dec 25, 2012
Patrick L commented on Gary McCray's blog post QuadroQuad - Quadcopter plus four horizontal motors / props = Stable Flight - I Hope!
"I had the same idea some time ago, and ultimately decided on an X8 coaxial configuration where the motors are all tilted 15 degs outwards. Another member here (Aerhead) has tried something similar before using a dual quad config.


It already flies…"
Dec 24, 2012
Patrick L commented on Chris Anderson's blog post 3D-printed drone from UVA
"They also didn't use the capabilities of 3D printers to create complex structures that cannot be practically otherwise. I mean, it should be possible to design and print an optimal trellis instead of the traditional solid rib and spar structure."
Oct 19, 2012
Patrick L replied to Stephen Roach's discussion Slow beep from ESCs, can't arm 2 of 6 motors **RESOLVED**
"The Good News: I've solved the issue.
Tracing with a logic analyser revealed the exact problem. Power is applied at A. When APM initilizes the rc channels, it activates the outputs and drives them high at B. PWM starts at C.


It's the long (and…"
Oct 18, 2012
Patrick L replied to Stephen Roach's discussion Slow beep from ESCs, can't arm 2 of 6 motors **RESOLVED**
"I'm having the same problem. Originally standard octo firmware was loaded by latest version of the planner, and all 8 TGY Plush 25A escs armed. Rebuilt arducopter in Arduino with OCTA_QUAD_FRAME and now only 3 escs arm. With a scope I see at least…"
Oct 15, 2012
Patrick L commented on Duran - ALTI's blog post FPV Cloudsurfing with APM2.5 and SteadiDrone X8 WING
"[spoilsport]
VFR. Victor Foxtrot Romeo. Visual Flight Rules. :)
Keep in mind that at 3600ft you're flying well inside class G airspace...
[/spoilsport]"
Sep 21, 2012
Patrick L commented on Duran - ALTI's blog post FPV Cloudsurfing with APM2.5 and SteadiDrone X8 WING
"Tears in my eyes, not from staring into the setting sun but from the sheer beauty.
Alas, just to spoil the fun: keep in mind VFR rules: 1500 meter horz, 1000ft vert from clouds ;-)"
Sep 21, 2012
Patrick L commented on Chris Anderson's blog post Walkera Ladybird nanocopter clone for $49 with RC!
"Now, now. Who'd've thunk the former King of (bad) Clones, Walkera, being cloned ? And who will be cloning the cloned clones next ? :-)"
Aug 10, 2012
Patrick L left a comment for Aerhead
"Hi Larry,
Have you considered writing a separate DIYD post about your flat flyer ? The community might be interested.
Patrick"
Jul 3, 2012
Patrick L commented on Bill Nesbitt's blog post AutoQuad FC fw v6.6
"The current reliance on PID controllers without considering kinematics such as linear+angular momentum and acceleration,  gyroscopic effects, motor thrust in a theoretical manner has it's limits. Multipilot32F4 / AutoQuad FC and ESC32 may finally…"
Jul 3, 2012
Patrick L commented on Rob_Lefebvre's blog post APM2 and Rx All-in-One!
"FrSky also makes the Futaba FASST compatible TFR4B. This 4 channel full range rx is quite cheap, small and light and can output CPPM and RSI using the jumper method. It works like a charm with APM2 and my T8FG.
@Veikko: I don't know about the TFR6,…"
Jun 10, 2012
Patrick L commented on trappy's blog post Lake Powell (TBS @ USA Road Trip)
" Thanks very much for driving my envy levels beyond what's medically safe ! 
But don't tell me you couldn't reach the Rainbow Bridge ? It's only 50km from Wahweap marina as the crow flies. :-P"
Mar 9, 2012
Patrick L commented on Gary Mortimer's blog post Someone stole these guys pole
"I thought about this to 'erect' a vertical full wave antenna for 160 meters with a 400V DC power feed.
The tether's weight and proper tensioning during ascent an descent are not trivial, though."
Feb 24, 2012
Patrick L commented on Sandro Benigno's blog post MinimOSD meets ArduCAM OSD Config
"Thanks !
Just in time for the correct 6 pin header that arrived today from 3DRobotics in a very large padded envelope :) Now that's great customer service, though an email asking whether I really needed it would have saved them some pocket money."
Feb 15, 2012
More…