Had 10 flights yesterday but no luck getting to WP's the model seems to be looking for the WP's.. but just gets further and further away. My question is. When a model arrives at the last WP, should it hold that position. Also when it arrives at the R
Read more…Can someone explain why my groundstation airspeed reads over 200 mph when it's on the ground. I running 2.2.3
Read more…I have 4 ardupilot boards which I built and set up 24 hours ago, all where working with gps locked and was able to read serial data Lat Long in through ide.Today I connected the power to the board 1 and could only get a power led on board 1 and 2 and
Read more…I am usng a JR radio and according to the manual it says to connect the IN one to channel one on the RX which is my throttle. and connect the ardupilot out one to the rudder which makes no sense to me!I have loaded 2.2.3 and becuse I have no sensors
Read more…I am running ver 2 groundstation which seems to be working ok, except the distance field it always reads 58074 Mtrs and do not have the xyz sensors yet waiting for them to become available, any idea what the problem is
Read more…When trying to load or verify 2.2.3 for the 406 gps I get this errorIn function 'void stabilization()':error: 'FLY_BY_WIRE_SPEED_SETPOINT' was not declared in this scopewhat am i doing wrong?
Read more…Is there another way to input waypoints into 2.2.3. I am unable to get the utility to read or write data, comes up with something is wrong!Any suggestions as to why the utility program wont read/write or importing the points, I have been told they ca
Read more…