Gender
Male
About
Location
BC
About Me:
I am a mechatronics engineering student. I am currently working with the government of Canada, helping develop drones for crop analysis.
Please tell us a bit about your UAV interest
I love multi-copters. I started off with planes and slowly have transferred to fpv through tri-copters and quadcopters.
Hometown:
Vancouver
Activity Feed
Hello world,Does anyone have any hardware documentation for the 3dr Solo. In particular the IMx6 board ? I am interested in finding out what the 1mm pins on that board map. Essentially I am trying to re-program the linux on-board that board to be an…
"This is awesome !! I will definitely use some in my videos . youtube.com/raigohalwar "
Hi,So missionplanner had a feature that allows the user to send differential gps data to copter gps using the telemetry link. It is called GPS Inject. Is there a similar feature for qgroundcontrol ? Thanks
So I have been working on a quad and a hex and can't seem to decide on which motors to get. I looked at many motors and come down to the emax 3510 because of their low retail price ($32) and amazing efficiency chart (I am running 3s wiith 15.5…
Hi,I would like to apologize if this question has been answered already. is it possible to run the Paparazzi software on the Pixhawk board?My thought process is that pixhawk is a board with a bunch of sensors, I can technically use any software i…
"Hi Nathanial,
Yes, I am using the Arducopter software. Thanks a lot for helping me out.
Rai"
Yes, I am using the Arducopter software. Thanks a lot for helping me out.
Rai"
Hi,I have a Tetracam Lite camera that I want to use on a 3DR x8 with a PIXHAWK on board. I want to trigger the camera at waypoints. The camera is triggered using RS232 serial signal. I need to print ESC and T (ASCII) to tell the camera to take a…
Hi,I am an RC/fpv pilot and I just moved to Ottawa Canada. I would like to know if anyone in the area is interested in flying together. I work at the experimental farm which happens to be the perfect spot to fly anyway.Rai Gohalwar
"Hi Marvin,
Essentially the easiest way to do this is to use a pre-defined variable within the code to use as a way to log and transmit your data. What I did for my application was, use the variable "Sonar Range" and send the data through that…"
Essentially the easiest way to do this is to use a pre-defined variable within the code to use as a way to log and transmit your data. What I did for my application was, use the variable "Sonar Range" and send the data through that…"
"Hi Chris,
the link you have provided doesn't work. Is there anywhere else I can look to figure out how to add an external sensor to the spi port and get the data transmitted back through mavlink.
Thanks in advance
-Rai Gohalwar"
the link you have provided doesn't work. Is there anywhere else I can look to figure out how to add an external sensor to the spi port and get the data transmitted back through mavlink.
Thanks in advance
-Rai Gohalwar"
"It kept saying that a float was used in case of a char in id 157
Weird, never seen that before. By the way i was using the console to do it. How do you build it from the eclipse?
-Rai Gohalwar"
Weird, never seen that before. By the way i was using the console to do it. How do you build it from the eclipse?
-Rai Gohalwar"
"Hi James,
Thanks, all done with the code modification.
What method of building the firmware did you use? Make or Microsoft visual basic?
reason I ask is because I am using make and it keeps giving me a variable error?
- Rai Gohalwar"
Thanks, all done with the code modification.
What method of building the firmware did you use? Make or Microsoft visual basic?
reason I ask is because I am using make and it keeps giving me a variable error?
- Rai Gohalwar"
"Hi James,
I have finally managed to make the changes to the arducopter files and have the necessary tools to build the firmware. However, I didn't understand what you meant by "Don't forget to uncomment USERHOOK_INIT and USERHOOK_MEDIUMLOOP in…"
I have finally managed to make the changes to the arducopter files and have the necessary tools to build the firmware. However, I didn't understand what you meant by "Don't forget to uncomment USERHOOK_INIT and USERHOOK_MEDIUMLOOP in…"
"Hi James,
Firstly, I must say that this simple example is so helpful. I would greatly appreciate if you could answer a couple of my questions.
1. I understand your GCS_Mavlink.pde code, however could you explain what your UserCode.pde does?
2.…"
Firstly, I must say that this simple example is so helpful. I would greatly appreciate if you could answer a couple of my questions.
1. I understand your GCS_Mavlink.pde code, however could you explain what your UserCode.pde does?
2.…"
Hi,I am trying to get an IR temperature sensor mounted on my copter to send back live data through a designated parameter through mavlink. The sensor has an option for analog or spi outputs for the signal. I have the pixhawk on board and have the…
"Hi,
I would love if someone could give me an estimate time when the rc3 would be available?
-Rai Gohalwar"
I would love if someone could give me an estimate time when the rc3 would be available?
-Rai Gohalwar"
