Gender
Male
About
Location
Saint Cloud, MN
Please tell us a bit about your UAV interest
been flying RC since 1073 and multi's since 2011
Hometown:
St Cloud MN
Activity Feed
"If I understand it correctly you don't need a sport or higher to get the 333, but when operating under the 333 you need to have someone with an airmen certificate to operate the craft"
"Who sings the song you used?"
"Very nicely done"
I have to much idea time waiting for the gimbal so I got to thinking and I don't like the way my props are bouncing against each other( I spent to much time balancing them to have them get out of balance in my bag). So I came up with my prop keeper…
I couldn't sleep last night so I started tinkering. One problem I have with my long leg extensions(to work with my Tarrot Gimbal) is that my motor shafts stick up above my case and would rub on the lid. So I thought about putting some sort of caps…
"Motor caps
I couldn't sleep last night so I started tinkering. One problem I have with my long leg extensions(to work with my Tarrot Gimbal) is that my motor shafts stick up above my case and would rub on the lid. So I thought about putting some…"
I couldn't sleep last night so I started tinkering. One problem I have with my long leg extensions(to work with my Tarrot Gimbal) is that my motor shafts stick up above my case and would rub on the lid. So I thought about putting some…"
"Send payment via paypal to richkphoto@gmail.com. Let me also know your shipping address and if you want the straight or bent legs and it's$5.00 a set of legs and $2.00 for first class shipping or $6.75 for Priority Mail"
"Last night I modified my leg extensions so they now slide nicely into the Solo backpack . If anyone is interested I can make eitherBent Leg small.jpgIn Case small.jpg"
"Here's a photo with the legs mounted, this is with my Tarrot gimbal that sits lower than the Solo Gimbal will"
I have these available for $5.00 plus shipping and I have the most time to make them on the weekend for those getting a gimbal and want a little more clearance. They will give you about 25mm more clearance( at least with my Tarrot gimbal. The weigh…
"Here's a video I shot today in very high winds 20mph gusting to 25-30. The new firmware held much better in the windhttps://www.youtube.com/watch?v=IXC87r-nXR8&feature=youtu.be"
"Here is my latest flight with the Tarrot2d Gimbal on the Solo. It is completely raw video right from the camera ,no post. I tried to upload the uncompressed mov version but for some reason Youtube says it's still…"
"Here is my morning flight. Raw almost unedited (just cut out the dead spots while programing mission and the glare off my partially bald head, I didn't want to blind anybody). There is a slight bit of jitter when I turn into the wind, have to do…"
"Here's a video I shot today with my Tarrot gimbal. Winds were 15mph gusting to 25 so I also ran it through warp stabilizer because being so well organized and not having used this gimbal for over a year I couldn't find my usb cable to bump up the…"
"Right now I'm running it off it's own 3s battery as I was told by 3dr if anything plugs into the electronics it would void the warranty. I trying to get them to allow hooking up the Tarrot gimbal to their connector"
"Sory for the delay in getting back to you ,I'm on the road today.What I did was take off the rail mounts on the Tarrot gimbal and use the screw holes to attach the gimbal to the adapter plate, I hope that helps, but something else use have to be…"
