Hi guy
i have been bouncing around some ideas with myself to create an ardu-copter-plane.
mechanically i beleve it can be done, but with software im not sure if the ardupilot can cope.
it has all the senses to control it all.
i believe that hardest part
Read more…hey guys
i have a hexa setup custom frame
code
.42
mission planner
.67
my issue is that im about to take off all 6 motors are running the next thing i know 2 motors stop running
in random order they dont sound like there running at the same rpm either, also
Read more…I would like to hook up 2 4c batteries do I Need to change anything on my set up I have the stock 20amp esc's.
Read more…i have started a couple of form discussions about camera stablization but i was given
just ajust -1 or 1on RC-CP rev i have posted a vid of wat i got.
pls help me out
does there need to be a code aadjustment
Read more…hey guys
i have a arducopter with a gimbal underneath, running 2.0.38 ACM.
is there any way in the code or in the mission planner i can reverse the output to the servos???
becoz im getting, if you lean forward the gimbal tilts down if you lean backward
Read more…hey i have put a camera mount on my copter
but i dont seem to have a stable pitch. the tilt platform seems to tilt in the same direction has the copter and not oppsite to keep a stable horizon.
any ideas to change this??
i have played with the rc-cp and
Read more…hey guys
can i edit my declination in cli mode or do i have to go though the mission planner again??
Read more…
i just cant seem to get my pids right
i drop P,D down to like 0 and its lil bit less than ok but then i have no control over it
int/max works a lil if i drop that bakhey guys
i just uploaded the lastest code 25 and im getting a funny action happaning
my copter is yawing 15-20 degrees left and right and at the same time it stuggles with the throttle
has anyone seen this before.
i have the larger arducopter setup.
i hav
hey guys
i have the latest code and software
i have onli ever uploaded the code from the mission planner
do i need to change the code on arduino?
i have gone though telemtry set up mulitiple times re reading constantly hoping i have missed somthing
i have
Read more…i cant arm the motors led A doesnt even start flashing. it stays solid green.
i have calibrated esc gone through set up atleast 5x both in mission planner and cli
using acm2.06
the quad was flying perfect yesterday.
the only main change i made was updat
what pid setting do i need to change to stop my copter oscillating???
Read more…hey guys
i want to get the latest code for my arducopter 2 so it doesnt have as may bugs how do i do this
without redownloading the code and rebooting.
can i just redo the code though the new mission planner and not have to do the whole set up
im reall
