About

Location

Trenton, NJ


About Me:

I enjoy building robots. Established scoutuav.com a resource for building quadcopters.


Please tell us a bit about your UAV interest

Remote surveillance aircrafts have always fascinated me.


Activity Feed

Russell - ScoutUAV.com commented on Chris Anderson's blog post ArduCopter/ArduPlane on the curriculum at NYU
"My alma mater.  ITP is a great program."
Nov 26, 2012
Russell - ScoutUAV.com commented on Russell - ScoutUAV.com's blog post Scout Hexa really stable with Arducopter 2.4.1
"Hi Steven, I built this hexa frame.   I did make room to allow for a FPV system.  I can build you this frame, if you are interested send me a message."
Mar 8, 2012
Russell - ScoutUAV.com posted a blog post
I have been working on a hexacopter for aerial videography and photography.   The hexacopter is equipped with a ArduPilot Mega with sonar, gps, magnetometer and a camera gimbal.  After hours of tuning, I got the Scout Hexa really dialed in.I really…
Mar 7, 2012
Russell - ScoutUAV.com replied to Sigfinn Andersen's discussion Size of hexa platform
"Yes longer arms do provide greater stability.   You will want to have your arms long enough to clear the neighboring propellers prop washer.   If you are going to use the aircraft for a camera platform, then it's better to keep the arm length to a…"
Feb 24, 2012
Russell - ScoutUAV.com commented on Azam Shahani's blog post Incredible Flight Endurance!
"Well said Squalish!"
Feb 13, 2012
Russell - ScoutUAV.com commented on Azam Shahani's blog post Incredible Flight Endurance!
"They are also running 12.2Ah and 18.3Ah (depending on model) Lipo batteries.   Those are 6 times larger than what is typical used on most quadcopters."
Feb 12, 2012
Russell - ScoutUAV.com replied to Bart's discussion CNC question
"The Fireball should be fine for your needs.   I just finished making a camera gimbal from 2D pieces.   The 1/16" bit is fine for making the slots, but I would use a 1/8" bit to cut the parts out.   Using the 1/16" bit to cut out the parts out will…"
Feb 5, 2012
Russell - ScoutUAV.com commented on Chris Anderson's blog post APM-powered hexacopter project on Kickstarter
"Looks like funding as been cancelled.  I wonder what happened?"
Jan 26, 2012
Russell - ScoutUAV.com replied to Gareth Rens's discussion 1280 board works, but 2560 board doesnt?
"I had the same problem with my 2560 board.   I tried uploading the firmware via Mission Planner and Arduino, firmware uploaded fine but I could not connect to Mission Planner.   My 1280 board connects fine to Mission Planner but the 2560 could never…"
Jan 13, 2012
Russell - ScoutUAV.com commented on Chris Anderson's blog post Scout UAV for sale now
"Hey Chris, Thanks for the mention!  I had quite a few people asking me about selling a kit and so I am.  Thanks!   "
Sep 14, 2011